UMF0J010MDD Datasheet, PDF (1/1 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
MF 5mmL, Low Impedance
series
Low impedance over wide temperature range of – 55 ~ +105°C, with 5mm height.
Suited for DC-DC converters where smaller case size and lower impedance are required.
Adapted to the RoHS directive (2002/95/EC).
MF
Low
Impedance
MT
Specifications
Item
Performance Characteristics
Category Temperature Range
– 55 ~ +105°C
Rated Voltage Range
6.3 ~ 35V
Rated Capacitance Range 1 ~ 100µF
Rated Capacitance Tolerance ± 20% at 120Hz, 20°C
Leakage Current
tan δ
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V)
tan δ (MAX.)
6.3
0.22
Measurement frequency : 120Hz, Temperature : 20°C
10
16
25
35
0.20
0.18
0.14
0.12
Rated voltage (V)
6.3
Stability at Low Temperature _{Impedance ratio}
Z– 25°C / Z+20°C
2
ZT / Z20 (MAX.)
Z– 55°C / Z+20°C
4
Measurement frequency : 120Hz
10
16
25
35
2
2
2
2
4
3
3
3
Endurance
Shelf Life
Marking
Radial Lead Type
Sleeve (P.E.T.)
After 1000 hours' application of rated voltage
at 105°C capacitors meet the characteristic
requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
200% or less of initial specified value
Initial specified value or less
After storig the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Type numbering system (Example : 25V 10µF)
1 2 3 4 5 6 7 8 9 10 11
φd
UMF 1 E 1 0 0 M DD
L^+1MAX
15 ^MIN
4 ^MIN
(mm)
φ D 4 5 6.3
P 1.5 2.0 2.5
φ d 0.45 0.45 0.45
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
4 ~ 6.3
DD
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (10µF)
Rated voltage (25V)
Series name
Type
Dimensions
Cap.(µF)
1
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
V
6.3
10
Code
0J
1A
010
1R5
2R2
3R3
4R7
6R8
100
150
220
4 × 5 5.0
50
5 × 5 2.6
80
330
5 × 5 2.6
80
5 × 5 2.6
80
470
5 × 5 2.6
80 6.3 × 5 1.3 115
680 6.3 × 5 1.3 115
101 6.3 × 5 1.3 115
Frequency coefficient of rated ripple current
Frequency
50 Hz 120 Hz 300 Hz 1 kHz
Coefficient
0.35
0.50
0.64
0.83
10 kHz ~
1.00
16
1C
4 × 5 5.0
5 × 5 2.6
5 × 5 2.6
6.3 × 5 1.3
6.3 × 5 1.3
25
35
1E
1V
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
4 × 5 5.0
50
5 × 5 2.6
80
50
5 × 5 2.6
80
5 × 5 2.6
80
80 6.3 × 5 1.3 115 6.3 × 5 1.3 115
80 6.3 × 5 1.3 115 6.3 × 5 1.3 115
115 6.3 × 5 1.3 115
115
Case size
φ D × L (mm)
Impedance
Rated
ripple
Max. Impedance (Ω) at 20°C 100kHz
Rated Ripple (mArms) at 105°C 100kHz
Please refer to page 21, 22, 23 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
CAT.8100V