UMA1V4R7MDD Datasheet, PDF (1/1 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
MA 5mmL, Standard, For General Purposes
series
Standard series with 5mm height.
Compliant to the RoHS directive (2011/65/EU).
MV Long Life
MT
High
Te m p e r a t u re
Specifications
MF Low
Impedance
MA
Bi-polarized MP
Item
Performance Characteristics
Category Temperature Range – 40 to +85°C
Rated Voltage Range
4 to 50V
Rated Capacitance Range 0.1 to 470µF
Rated Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater.
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
4
0.35
6.3
10
16
25
35
50
Figures in ( ) are for
0.24 (0.30) 0.20 (0.24) 0.16 (0.20) 0.14 (0.18) 0.12 (0.16) 0.10 (0.13) MR series.
Measurement frequency : 120Hz
Rated voltage (V)
4
6.3
10
16
25
35
50
Stability at Low Temperature _{Impedance ratio Z– 25°C / Z+20°C}
7
4
3
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C 15
8
6
4
4
3
3
Endurance
The specifications listed at right shall be met
when the capacitors are restored to 20°C after
the rated voltage is applied for 2000 hours at
85°C.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value (MR series & φ 3 product : Within ±25%)
200% or less than the initial specified value
Less than or equal to the initial specified value
Shelf Life
Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
( φ 3 : P^±0.3 )
L^+1MAX.
15 ^MIN
4 ^MIN
(mm)
φ D 3 4 5 6.3 8
P 1.0 1.5 2.0 2.5 2.5
φ d 0.4 0.45 0.45 0.45 0.45
• Please refer to page 20 about the end seal configuration.
Dimensions
Type numbering system (Example : 25V 10µF)
1 2 3 4 5 6 7 8 9 10 11 12
UMA 1 E 1 0 0 M DD
2
Size code
φD
3
4 to 8
Code
2
—
Configuration 1
Capacitance tolerance (± 20%)
Rated capacitance (10µF)
Rated voltage (25V)
Series name
1 Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
3
CD
4 to 8
DD
2 In case at φ 3 units, put 2 as size code.
Type
V
4
6.3
10
16
25
35
50
Cap.(µF)
Code
0G
0J
1A
1C
1E
1V
1H
0.1
0R1
4 × 5(3 × 5) 1.0(1.0)
0.22
R22
4 × 5(3 × 5) 2.0(2.0)
0.33
R33
4 × 5(3 × 5) 2.8(2.8)
0.47
R47
4 × 5(3 × 5) 4.0(4.0)
1
010
2.2
2R2
0.3 × 5
4 × 5(3 × 5) 8.4(8.0)
8.4 0.4 × 5 13(10)
3.3
3R3
0.3 × 5
10
0.4 × 5 15(10) 0.4 × 5
17
4.7
4R7
0.3 × 5
10
0.4 × 5 16(12) 0.4 × 5
18
0.5 × 5
20
10
100
0.3 × 5
15
0.4 × 5 23(18) 0.5 × 5
27
0.5 × 5
29
6.3 × 5
33
22
220 0.3 × 5
19
0.4 × 5 28(21) 0.5 × 5
33
0.5 × 5
37
6.3 × 5
42
6.3 × 5
46
0.8 × 5 52(48)
33
330 0.4 × 5
28
0.5 × 5
37
0.5 × 5
41
6.3 × 5 49(43) 6.3 × 5
52
0.8 × 5 62(52) 0.8 × 5
71
47
470 0.4 × 5
33
0.5 × 5
45
6.3 × 5 52(43) 6.3 × 5
58
0.8 × 5 70(62) 0.8 × 5
80
100
101 0.5 × 5
56
6.3 × 5 70(68) 0.8 × 5 80(76) 0.8 × 5 92(86) 0.8 × 5 110
220
221 6.3 × 5
96
0.8 × 5 110(90) 0.8 × 5 135
330
331 0.8 × 5 145 0.8 × 5 170
470
471 0.8 × 5 185
Case size Rated
φ D × L (mm) ripple
Size φ3 × 5 is available for capacitors marked. " "/ Size φ5 × 5 is available for capacitors marked. " "
Size φ6.3 × 5 is available for capacitors marked. " " In such a case, M R will be put at 2nd and 3rd digit of type numbering system.
Frequency coefficient of rated ripple current
Rated ripple current (mArms) at 85°C 120Hz
( ) = φ3 units and MR series.
Frequency
Coefficient
50 Hz
0.70
120 Hz
1.00
300 Hz
1.17
1 kHz 10 kHz or more
1.36
1.50
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
CAT.8100C