UKL0J471MDD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
KL Low Leakage Current
series
Standard low leakage current series.
Adapted to the RoHS directive (2002/95/EC).
VR Low Leakage
Current
KL
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Performance Characteristics
– 40 ~ +85°C ( – 40 ~ +105°C product also available upon request, but product rated at up to 50V less than or equal to φ10 × 12.5 Lmm)
6.3 ~ 100V
0.1 ~ 10000µF
± 20% (M), ± 10% (K) at 120Hz 20°C
After 1 minute's (for case size 10 × 12.5 or smaller) or 2 minute's (for case size 10 × 16 or larger) application of rated voltage,
leakage current is not more than 0.002CV or 0.2 (µA) whichever is greater.
tan δ
Rated voltage (V)
tan δ (MAX.)
~φ10 × 12.5
φ10 × 16 ~
6.3
0.18
0.21
10
0.15
0.17
16
0.12
0.14
25
0.08
0.12
35
0.08
0.12
For capacitance of more than 1000µF, add 0.02 for every increace of 1000µF.
50
0.08
0.10
63
0.07
0.08
100
0.07
0.08
120Hz, 20°C
stability at Low Temperature
Rated voltage (V)
Impedance ratio Z– 25°C / Z+20°C
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
6.3
3 (4)
5 (8)
10
2 (3)
4 (6)
16
2
3 (4)
25
1.5
2 (4)
35
1.5
2 (3)
50
1.5
2 (3)
63
1.5
2 (3)
100
1.5
2 (3)
120Hz
Values in ( ) applicable to
φ10 × 16 or larger case size.
Endurance
Shelf Life
Marking
After 2000 hours' application of rated voltage
at 85°C, or 1000 hours' at 105°C, capacitors
meet the characteristics requirements listed
at right.
Capacitance change Within ±15% of initial value (6.3V : Within ±20%)
tan δ
150% or less of initial specified value
Leakage current
Initial specified value or less
After storing the capacitors under no load at 85˚C for 1000 hours, and after performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on black sleeve.
Radial Lead Type
Type numbering system (Example : 10V 47µF)
Sleeve (P.E.T.)
φd
Pressure
relief vent
(φ6.3up )
L+ ^MAX.
15 ^MIN
4 ^MIN
(~ φ10 × 12.5) 1.0
(φ10 × 16 ~) 1.5
φD
5 6.3 8
10 12.5 16
P 2.0 2.5 3.5 5.0 5.0 7.5
φd 0.5 0.5 0.6 0.6 0.6 0.8
• Please refer to page 21 about the end seal configulation.
Frequency coefficient of rated ripple current
Cap.(µF)
Frequency
~ 68
100 ~ 680
1000 ~ 10000
50Hz
0.75
0.80
0.85
120Hz
1.00
1.00
1.00
300Hz
1.35
1.23
1.10
1kHz
1.57
1.34
1.13
10kHz ~
2.00
1.50
1.15
(mm)
18
7.5
0.8
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UK L 1 A 4 7 0 MDD ANA
2
Configuration 1
Capacitance tolerance
(M : ± 20%, K : ± 10%)
Rated Capacitance (47µF)
Rated voltage (10V)
Series name
Type
1 Configuration
2 In case 105°C unit is required
φD
5
6.3
8 · 10
12.5 ~ 18
Pb-free leadwire
Pb-free PET sleeve
DD
ED
PD
HD
Please refer to page 21, 22, 23 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
CAT.8100V-1