UHE1C102MPD Datasheet, PDF (1/5 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
HE Miniature Sized, Low Impedance,High Reliability
series
Low impedance and high reliability withstanding 4000 hours to 10000 hours.
Compliant to the RoHS directive (2002/95/EC).
HE
Long Life HD
Approved by Reliability Center for Electronic
Component, Japan-Certification No. RCJ-03-23C
Specifications
ltem
Performance Characteristics
Category Temperature Range – 40 to +105˚C
Rated Voltage Range
6.3 to 100V
Rated Capacitance Range
0.47 to 18000µF
Capacitance Tolerance
± 20% at 120Hz, 20˚C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater.
Rated voltage (V)
6.3
10
16
25
35
50
63
100
Tangent of loss angle (tan δ)
tan δ (MAX.)
0.22
0.19
0.16
0.14
0.12
0.10
0.09
0.08
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Rated voltage (V)
6.3
10
16
25
35
50
63
100
Stability at Low Temperature _{Impedance ratio} Z–25˚C / Z+20˚C
4
3
2
2
2
2
2
2
ZT / Z20 (MAX.) _{Z–40˚C / Z+20˚C}
8
6
4
3
3
3
3
3
120Hz
20˚C
120Hz
The following specifications shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is
applied at 105˚C , the peak voltage shall not exceed the rated voltage.
Endurance
Marking
Case size
φD ^<= 6.3
φD = 8 , 10
φD ^>= 12.5
Rated voltage ^{6.3 to 10WV}
(V)
16 to 100WV
4000 hours
5000 hours
6000 hours
7000 hours
8000 hours
10000 hours
Capacitance change
Within ± 25% of the initial capacitance value
tan δ
200% or less than the initial specified value
Leakage current
Less than or equal to the initial specified value
Printed with white color letter on black sleeve.
Radial Lead Type
φd
Sleeve (P.E.T.)
Type numbering system (Example : 10V 1000µF)
1 2 3 4 5 6 7 8 9 10 11 12
UHE 1 A 1 0 2 M PD
L+ ^MAX.
Pressurerelief vent
(φ6.3up)
(L < 20) 1.5
(L 20) 2.0
15^MIN
4^MIN
(mm)
φD 5 6.3 8 10 12.5 16 18
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φd = 0.8mm
• Please refer to page 20 about the end seal configulation.
Frequency coefficient of rated ripple current
Cap. (µF)
Frequency
0.47 to 33
50Hz
0.45
120Hz
0.55
300Hz
0.70
39 to 330
0.60
0.70
0.85
390 to 1000
0.65
0.75
0.90
1200 to 18000
0.75
0.80
0.95
1kHz
0.90
0.95
0.98
1.00
10kHz or more
1.00
1.00
1.00
1.00
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
5
DD
6.3
ED
8 · 10
PD
12.5 to 18
HD
Size code
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (1000µF)
Rated voltage (10V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100B