UFW1H102MHD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
FW Standard, For Audio Equipment
series
Compliant to the RoHS directive (2011/65/EU).
FG High Grade
KW
High Sound
Quality
FW
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Performance Characteristics
– 40 to +85°C
6.3 to 100V
0.1 to 33000µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.03 CV or 4 (µA) , whichever is greater.
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater.
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
6.3
0.28
10
0.24
16
0.20
25
0.16
35
0.14
50
0.12
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
63
0.10
100
0.08
Measurement frequency : 120Hz at 20°C
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
63
100
Stability at Low Temperature
Impedance ratio Z– 25°C / Z+20°C
5
4
3
2
2
2
2
2
ZT / Z20 (MAX.) Z– 40°C / Z+20°C
12
10
8
5
4
3
3
3
Endurance
Shelf Life
Marking
The specifications listed at right shall be met
when the capacitors are restored to 20°C after
the rated voltage is applied for 2000 hours at
85°C.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with black color letter on Gold sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
(φ 6.3up)
L+ ^MAX.
15^MIN
4^MIN
(mm)
φD 5 6.3 8 10 12.5 16 18 20 22 25
P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 10 12.5
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0
(φD < 20) 1.5
(φD 20) 2.0
• Please refer to page 20 about the end seal configuration.
Type numbering system (Example : 10V 1000µF)
1 2 3 4 5 6 7 8 9 10 11
U FW 1 A 1 0 2 M PD
Configuration
φD
5
6.3
8 ·10
12.5 to 18
20 to 25
Pb-free leadwire
Pb-free PET sleeve
DD
ED
PD
HD
RD
Configuration
Capacitance tolerance
(± 20%)
Rated capacitance (1000µF)
Rated voltage (10V)
Series name
Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100C