UCZ1V470MCL1GS Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
CZ Chip Type, High Reliability.
Low temperature ESR specification.
series
Chip type, high temperature range, for +125°C use.
Added ESR specification after the test at -40°C.
Applicable to automatic mounting machine fed with carrier tape.
Compliant to the RoHS directive (2002/95/EC).
CZ
Low ESR
Long Life
CJ
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Performance Characteristics
–40 to +125°C
10 to 100V
10 to 470 µF
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(µA), whichever is greater.
Measurement frequency : 120Hz at 20°C
Tangent of loss angle (tan δ) ^{Rated voltage (V)}
tan δ (MAX.)
10
0.30
16
0.23
25
0.18
35
0.16
50
0.16
63
0.12
80
0.12
100
0.10
Measurement frequency : 120Hz
Rated voltage (V)
10
16
25
35
50
63
80
100
Stability at Low Temperature
Impedance ratio _{Z–40°C / Z+20°C}
ZT / Z20 (MAX.)
12
8
6
4
4
3
3
3
Endurance
After 3000 hours (1000hours for φ6.3 × 5.8L, 2000hours for
φD=6.3 × 7.7L) application of rated voltage at 125°C,
capacitors meet the characteristics requirements listed
below.
Capacitance Change
tan δ
Leakage current
Within ± 30% of the initial capacitance value
300% or less than the initial specified value
Less than or equal to the initial specified value
Shelf Life
Resistance to
soldering heat
Marking
After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
The capacitors are kept on a hot plate for 30 seconds,
which is maintained at 250°C. The capacitors shall meet
the characteristic requirements listed at right when they
are removed from the plate and restored to 20°C.
Capacitance Change
tan δ
Leakage current
Within ±10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Black print on the case top.
Chip Type
(φ 6.3) Standard
Voltage (C:35V)
Series
please contact us for vibration resistance.
Plastic platform
0.3MAX.
C±0.2
Positive
Lot No.
Capacitance
L ± 0.3
H
Negative
Type numbering system (Example : 35V 47µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UC Z 1 V 4 7 0 MC L 1 GS
Package code
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (47µF)
Rated voltage (35V)
Series name
Configration Code
Standard
L
Vibration Resistance S
Type
(φ 8 to φ10) Standard
Voltage (V : 35V)
Series
Trade mark
Plastic platform
0.3MAX.
C±0.2
Positive
(φ 8 to φ10)
Voltage (V : 35V)
Trade mark
Vibration Resistance
Plastic platform
Series
0.3 MAX.
C±0.2
L±0.5
Lot No.
Capacitance
H
Standard
(mm) Vibration Resistance (mm)
φ D × L _{6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10}
φ D × L _{8 × 10 10 × 10}
A
2.4 2.4 2.9 3.2
B
6.6 6.6 8.3 10.3
C
6.6 6.6 8.3 10.3
E
2.2 2.2 3.1 4.5
L
5.8 7.7
10
10
H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1
A
2.9 3.2
B
8.3 10.3
C
8.3 10.3
E
3.1 4.5
L
10
10
H 1.1 to 1.5 1.1 to 1.5
Negative
Lot No.
Capacitance
L±1.0
Rated Voltage
V 10 16 25 35 50 63 80 100
Code A C E V H J K 2A
H
Aid electrode
CAT.8100B