UCY2G180MPD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
CY Miniature Sized, High Ripple Current, High Reliability
series
High ripple current and Long Life product withstanding
load life of 10000 to 12000 hours at +105°C.
Suited for ballast application.
Compliant to the RoHS directive (2002/95/EC).
CS
Smaller
CY
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Performance Characteristics
– 40 to +105°C (160 to 400V), – 25 to +105°C (420 to 500V)
160 to 500V
6.8 to 560µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
160
0.20
200
0.20
250
0.20
350
0.24
Measurement frequency : 120Hz at 20°C
400
420
450
500
0.24
0.24
0.24
0.24
Measurement frequency : 120Hz
Rated voltage (V)
160 200 250 350 400 420 450 500
Stability at Low Temperature
Z–25°C / Z+20°C
Impedance ratio ZT / Z20 (MAX.) _{Z–40°C / Z+20°C}
3
6
3
6
3
6
5
6
5
6
6
--
6
--
6
--
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after D.C. bias plus rated
ripple current is applied for 12000 hours (10000 hours for 20L
or less, 500V) at 105˚C, the peak voltage shall not exceed the
rated voltage.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
L ^{+ 1.5 MAX.}
15 ^MIN
4 ^MIN
(mm)
φD 10 12.5 16 18
P 5.0 5.0 7.5 7.5
φd 0.6 0.6 0.8 0.8
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
• Please refer to page 20 about the end seal configulation.
Type numbering system (Example : 250V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12
U CY 2 E 1 0 1 M HD T
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (250V)
Series name
Type
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
10
PD
12.5 to 18
HD
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100B