UCS2E101MND9 Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
CS Miniature Sized, High Ripple Current, High Reliability
series
High ripple current and Long Life product withstanding
load life of 8000 to 10000 hours at +105°C.
Suited for ballast application.
Compliant to the RoHS directive (2011/65/EU).
CA
Smaller
CS
Smaller
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
CP CY
Performance Characteristics
– 40 to +105°C (160 to 400V) , – 25 to +105°C (450V)
160 to 450V
6.8 to 330µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
160
0.20
200
0.20
Measurement frequency : 120Hz at 20°C
250
350
400
450
0.20
0.24
0.24
0.24
Measurement frequency : 120Hz
Rated voltage (V)
160
200
250
350
400
450
Stability at Low Temperature
Z– 25°C / Z+20°C
3
3
3
5
5
6
Impedance ratio ZT / Z20 (MAX.) _{Z– 40°C / Z+20°C}
6
6
6
6
6
--
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 10000 hours (8000 hours for
φD=10 × 16L, 10 × 20L) at 105°C, the peak voltage shall not
exceed the rated voltage.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
φd
Pressure
relief vent
L ^{+ 1.5MAX.}
15 ^MIN
4 ^MIN
Pencil - shaped Type
φd
Sleeve (P.E.T.)
Type numbering system (Example : 250V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12
U CS 2 E 1 0 1 M HD T
Size code 2
Configuration
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (250V)
Series name
Type
Configuration
Size code 2
Blank, 6
φD
10
12.5 to 18
Pb-free leadwire
Pb-free PET sleeve
PD
HD
9
Pb-free leadwire
Pb-free PET sleeve
ND
NY
Pressure
relief vent
L+ ^{2.0 MAX.}
15^MIN
(mm)
4^MIN
φD 10 12.5 16 18
P 5.0 5.0 7.5 7.5
φd 0.6 0.6 0.8 0.8
• Please refer to page 20 about the end seal configuration.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100C