UCS2C100MHD Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
CS Miniature Sized, High Ripple Current, Long Life
series
High ripple current and Long Life product withstanding
load life of 8000 to 10000 hours at +105°C.
Suited for ballast application.
Adapted to the RoHS directive (2002/95/EC).
CA
Smaller
CS
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Performance Characteristics
– 40 ~ +105°C (160 ~ 400V) , – 25 ~ +105°C (450V)
160 ~ 450V
6.8 ~ 330µF
± 20% at 120Hz, 20°C
After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA)
tan δ
Rated voltage (V)
tan δ (MAX.)
160
0.20
Measurement frequency : 120Hz, Temperature : 20°C
200
250
350
400
450
0.20
0.20
0.24
0.24
0.24
Measurement frequency : 120Hz
Rated voltage (V)
160
200
250
350
400
450
Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.) ^{Z– 25°C / Z+20°C}
3
3
3
5
5
6
Z– 40°C / Z+20°C
6
6
6
6
6
--
Endurance
Shelf Life
Marking
After an application of D.C. bias voltage plus the rated ripple
current for 10000 hours (8000 hours for φ D =10) at 105°C the
peak voltage shall not exceed the rated D.C. voltage,
capacitors meet the characteristic requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
200% or less of initial specified value
Initial specified value or less
After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on dark brown sleeve.
Radial Lead Type
Sleeve (P.E.T.)
Bd
rePlrieesf ^svuernet _L +1.5MAX.
15 ^MIN
4 ^MIN
(mm)
BD 10 12.5 16 18
P 5.0 5.0 7.5 7.5
Bd 0.6 0.6 0.8 0.8
• Please refer to page 21 about the end seal configulation.
Type numbering system (Example : 250V 100µF)
U1 C2 S3 24 E5 16 07 18 M9 1H0 D11 T12
Size code
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (100µF)
Rated voltage (250V)
Series name
Type
Configuration
B D ^{PPbb--ffrreeee lPeEaTdwsilreeeve}
10
PD
12.5 ~ 18
HD
Please refer to page 21, 22, 23 about the formed or taped product spec.
Please refer to page 3 for the minimum order quantity.
Dimension table in next page.
CAT.8100V