UCD1C221MCL6GS Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
CD Chip Type, Low Impedance
series
Chip type, low impedance temperature range up to +105°C.
Designed for surface mounting on high density PC board.
Applicable to automatic mounting machine fed with carrier tape.
Compliant to the RoHS directive (2011/65/EU).
CL
Low
Impedance
CD
Low
Impedance
UD
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Performance Characteristics
– 55 to +105°C
6.3 to 100V
1 to 3300µF
± 20% at 120Hz, 20°C
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater.
Rated voltage (V)
6.3
10
16
25
tan δ (MAX.)
0.26 0.19 0.16 0.14
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Measurement frequency : 120Hz at 20°C
35
50
63
80
100
0.12 0.10 0.08 0.08 0.07
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25
35
50
63
80
100
Z—25°C / Z+20°C 2
2
2
2
2
2
2
2
2
Impecance ratio
ZT / Z20 (MAX.) ^{Z—40°C / Z+20°C}
3
3
3
3
3
3
3
3
3
Z—55°C / Z+20°C 4
4
4
3
3
3
3
3
3
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 5000 hours (2000 hours for L 10 mm: 50V
or less, and for L 10mm: 63V or more) at 105°C.
Capacitance Change
tan δ
Leakage current
Within ± 30% of the initial capacitance value
200% or less than the initial specified value
300% or less than the initial specified value for 63V or more
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at
20°C, they shall meet the specified values for the endurance characteristics listed above.
Resistance to soldering
heat
Marking
The capacitors are kept on a hot plate for 30 seconds, which is
maintained at 250°C. The capacitors shall meet the characteristic
requirements listed at right when they are removed from the
plate and restored to 20°C.
Capacitance Change
tan δ
Leakage current
Black print on the case top.
Within ± 10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Chip Type
(φ4 to φ8 × φ6.2)
Voltage ( j : 6.3V )
Series
1 Trade mark
Plastic platform
0.3 MAX.
C± 0.2
Positive
Lot No.
Capacitance
(φ8 × 10, φ10)
Voltage (E : 25V)
Series
Trade mark
L± 0.3
Plastic platform
0.3 MAX.
H
Negative
1: Size φ8 × 6.2 only
Positive
C± 0.2
Pressure 2
relief vent
L± 0.5
Lot No.
Capacitance
2 : Except : φ10 × 7.7L
(φ12.5 to φ18)
Voltage
Trade mark
Lot No.
Plastic platform
0.3 MAX.
H
C± 0.2
Negative
Positive
Capacitance
Pressure
relief vent
Series
L± 1.0
H
Negative
φ8 × 10L, φ10 × 10L, φ12.5 × 13.5L, φ16 × 16.5L, φ18 × 16.5L :
The vibration structure-resistant product is also available upon request, please ask for details.
Dimension table in next page.
Type numbering system (Example : 16V 100µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UCD 1C 1 0 1 M CL 1 GS
Package code
Size Package Code
φ4 to 10 Taping GS
φ12.5 to 18 Taping MS
φ12.5 to 18 Tray
ZD
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (16V)
Series name
Type
φD
Code
4 to 6.3 CL
8 (6.2L) CL
10(7.7L) CL
8(10L) •
10(10L,13.5L)
NL
12.5 to 18 NQ
φ D × L _{4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 6.2 8 × 10 10 × 7.7 10 × 10} (mm)
A
1.8
2.1
2.4
2.4
3.3
2.9
3.2
3.2
B
4.3
5.3
6.6
6.6
8.3
8.3 10.3 10.3
C
4.3
5.3
6.6
6.6
8.3
8.3 10.3 10.3
E
1.0
1.3
2.2
2.2
2.3
3.1
4.5
4.5
L
5.8
5.8
5.8
7.7
6.2
10
7.7
10
H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1
φ D × L _{10 × 13.5 12.5 × 13.5 16 × 16.5 18 × 16.5}
A
3.2
4.8
5.4
6.4
B
10.3 13.6 17.1 19.1
C
10.3 13.6 17.1 19.1
E
4.5
4.0
6.3
6.3
L
13.5 13.5 16.5 16.5
H 0.8 to 1.1 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4
Voltage
V
6.3 10 16 25 35 50 63 80 100
Code
j
A
C
E
V
H
J
K 2A
CAT.8100C