TVX1A331MAD_15 Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
TVX Standard, For General Purposes - Axial Lead Type
(02 type)
Axial lead type of standard series for general purposes.
Compliant to the RoHS directive (2011/65/EU).
(Through 100V only)
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Performance Characteristics
–40 to +85°C (6.3 to 250V), –25 to +85°C (315 to 450V)
6.3 to 450V
0.47 to 10000µF
± 20% at 120Hz, 20°C
Leakage Current
Rated voltage (V)
Leakage current
6.3 to 100
After 1 minute's application of rated voltage at 20°C,
not more than 0.03CV or 4 (µA) , whichever is greater.
After 2 minutes' application of rated voltage at 20°C,
not more than 0.01CV or 3 (µA) , whichever is greater.
160 to 450
In case of CV 1000
After 1 minute's application of rated voltage at 20°C,
not more than 0.1CV+40 (µA) .
In case of CV > 1000
After 1 minute's application of rated voltage at 20°C,
not more than 0.04CV+100 (µA) .
Tangent of loss angle (tan δ)
Stability at Low Temperature
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
6.3
0.24
10
0.20
16
0.16
25
0.14
35
0.12
50
0.10
63 to 100 160 to 315 350 to 450
0.08
0.20
0.25
For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF.
Measurement frequency : 120Hz
Rated voltage (V)
6.3
10
16
25 35 to 100 160 to 250 315 · 350 400 · 450
Impedance ratio Z–25°C / Z+20°C
4
3
2
2
2
4
6
15
ZT / Z20 (MAX.) Z–40°C / Z+20°C ₁₀
8
6
4
3
12
—
—
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when
the capacitors are restored to 20°C after the rated
voltage is applied for 2000 hours at 85°C.
After storing the capacitors under no load at 85°C for
1000 hours and then performing voltage treatment
based on JIS C 5101-4 clause 4.1 at 20°C, they shall
meet the characteristic requirements at right.
Printed with white color letter on purple blue sleeve.
Capacitance change
tan δ
Leakage current
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Axial Lead Type
Sleeve (P.E.T.)
Sealing rubber packing
Pressure relief vent
(φ10up)
φd
35 MIN
L+ ^MAX
35 MIN
(φD < 10) 1
α
(φD 10) 2
φ D 5 to 13
φ d 0.6
(mm)
16 to 18
0.8
Type numbering system (Example : 10V 330µF)
1 2 3 4 5 6 7 8 9 10 11
TVX 1 A 3 3 1 MAD
Configuration
Capacitance tolerance (±20%)
Rated capacitance (330µF)
Rated voltage (10V)
Series name
Type
Configuration
φD
Pb-free leadwire
Pb-free PET sleeve
5 to 8
AD
10 to 18
CD
Please refer to page 22 about the taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
178
CAT.8100E