LNX2V102MSEF Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
NX Screw Terminal Type, High ripple longer life.
series
Suited for use in industrial power supplies for inverter circuitry, etc.
High ripple current, extra-high voltage application.
High reliability, long life for 20,000 hours application of rated ripple
current at +85°C.
Extended range up to φ100 × 250L size.
Flame retardant electroly to type available.
Bushing type for better vibration and insulation also available.
Available for adapted to the RoHS directive (2002/95/EC).
QR
High Speed
charge-
discharge
NX
Long life NR
Specifications
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
tan δ
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance Characteristics
– 25 ~ +85°C
350 ~ 630V
1000 ~ 27000µF
± 20% at 120Hz, 20°C
After 5 minutes' application of rated voltage, leakage current is not more than 3 _CV (µA) or 5 mA, whichever is smaller (at 20°C).
[C : Rated Capacitance(µF), V : Voltage ( V ) ]
See P225 (Measurement frequency : 120Hz, Temperature : 20°C)
Rated voltage (V)
Impedance ratio ZT/Z20(MAX.)
350 ~ 630
Z – 25°C / Z+20°C
8
Measurement frequency : 120Hz
After an application of DC voltage (in the range of rated voltage even after over-lapping the standard ripple current) for 20,000 hours at 85°C, capacitors shall meet the
characteristics requirements indicated at right. (2000 hours at 85°C for the parts rated at 630V, 5000 hours at 85°C for the parts rated at 500V and 550V)
After an application of DC voltage (in the range of rated DC voltage even after
over-lapping the maximum allowable ripple current) for 5000 hours at 85°C,
capacitors meet the characteristic requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±20% of initial value
300% or less of initial specified value
Initial specified value or less
After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C,
they will meet the specified value for endurance characteristics listed above.
Printed with white color letter on black sleeve.
Drawing
Method mount metal bracket
Bottom plate
Sleeve
Hexagenal headed bolt
120¡
Method to mount resin bushing (φ76.2 ) (Apply to L=150 or more)
Bottom plate
Pressure relief vent
Sleeve
Resin bushing Hexagenal headed bolt
B4.5
Pressure
relief vent
h
H^±1
L^{+ MAX.}
B
±1
B
3-leg brackets for φ90 capacitors have different
hole shapes from the ordinary ones illustrated
below.
P
7
P^±2
T
A^±2
U
U
S
74.4
105
L+3MAX.
120
Method to mount resin bushing (φ90) (Apply to L=150 or more)
Bottom plate
Sleeve
Resin bushing
Hexagenal headed bolt
120¡
Pressure
relief vent
Pressure relief vent
30¡
65.7
L+3MAX.
57.5
B6.0
63.5
Dimension of terminal pitch (W) and length (R) and Nominal dia.of bolt
(mm) ^{Type numbering system (Example : 450V 2200µF)}
φD
W
R
51
22.0
6
63.5
28.6
6
α
3
L N X 2 W 2 2 2 M S E Nominal dia. of bolt 1 2 3 4 5 6 7 8 9 10 11 12 13 14
M5
3
M5
Mounting bracket
76.2
31.8
6
90
31.8
6
100
41.5
10
3
M5
3
M5
4
M8
Dimensions of mounting bracket
(mm)
Leg shape
3--Leg
2--Leg
Symbol
φD ₅₁
63.5 76.2
90
100
51
63.5 76.2
90
Case dia. code
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (2200mF)
BD Code
51 F
63.5 G
76.2 H
90 J
(_Cf_o5_d1_e~_lef_ss90₃) _{-leg brackets}
BB 2-leg brackets
BN No brackets
(f 100)
Code less 3-leg brackets
BN No brackets
Rated voltage (450V) 100 K
P
32.5 38.1 44.5 50.8 56.3 33.2 40.5 46.5 53
Series name
A
T
S
U
38.5
43
49.2 58.5
62
40
46.5
53
59
7.5
8.0
7.0
8.0
8.0
6.0
7.0
6.0
6.0
5.0
5.0
5.0
5.0
5.0
4.5
4.5
4.5
4.5
12
14
14
18
16
14
14
14
14
Type
Configuration
(CRro(H¹¹¹S) ^{Pcloamtinpgliant)}
Cr (81) Plating
°
60
60
60
60
60
30
30
30
30
SE
SM
H
20 25 30 35 36 25 35 35 35 Resin bushing available upon request.
h
15
20
24
25
30
15
20
20
20
Please contact to us if PVC less products are required.
Dimension table in next page.
CAT.8100V