LKG1E682MESBBK Datasheet, PDF (1/8 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
LKG Lug / Snap-in Terminal Type, 
For Audio Equipment
Disigned for high grade audio equipment, giving priority to high fidelity sound quality.
The variation expansion of the LKG.
TYPE-1: The low profile high tone quality grade of the new development
Super Through
electrolyte adoption.
TYPE-2: The center grade that the best sound is provided electrode foil,
with the multiple use.
High Grade
TYPE-3: The highest tone quality grade by the low drag the gold plating
terminal adoption.
Gold Tune
The sound quality that it meets the high tone quality needs for HD Audio equipment.
Compliant to the RoHS directive (2011/65/EU).
Specifications
Item
Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
16 to 100V (TYPE-1, TYPE-2, TYPE-3)
680 to 33000µF
3 CV
± 20% at 120Hz,  20°C
3 CV
After 5 minutes' application of rated voltage, leakage current is not more than  3 CV (µA), [C : Rated Capacitance(µF), V : Voltage ( V ) ]
Tangent of loss angle (tan δ)
For capacitance of more than 22000µF, add 0.02 for every increase of 1000µF.
TYPE
Rated voltage(V)
TYPE-1, TYPE-2
16
25 to 63
80 • 100
tan δ (MAX.)
0.35
0.30
0.25
16
0.25
Measurement frequency : 120Hz at 20°C
TYPE-3
25 to 63
80 • 100
0.22
0.20
Stability at Low Temperature
Rated voltage(V)
Impedance ratio ZT/Z20(MAX.) ^{Z – 25°C/ Z+20°C}
Z – 40°C/ Z+20°C
16 to 100
4
12
Measurement frequency : 120Hz
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 1000 hours at 85°C.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Shelf Life
Marking
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause
4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Printed with gold color letter on black sleeve.
Type numbering system (Snap-in terminal type)
(Example : Gold Tune 25 V 6800µF, Dia.φ30)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
L KG 1 E 6 8 2 ME S B BK
Grade
Code
Grade
TYPE-1(Gold Tune) AK
TYPE-2(Gold Tune) BK
TYPE-3(Super Through) CK
1 Configuration
Pb-free terminal
Pb-free PET sleeve
ES
Configuration 1
Capacitance tolerance (±20%)
Rated capacitance(6800µF)
Rated voltage(25V)
Series name
Type
Case dia.code
(Snap-in terminal type)
Type numbering system (Lug terminal type)
(Example : Super Through 50 V 15000µF)
1 2 3 4 5 6 7 8 9 10 11 12
L KG 1 H 1 5 3 MK Z S
Grade
Grade
TYPE-1(Gold Tune)
TYPE-2(Gold Tune)
TYPE-3(Super Through)
Code
F
—
S
Configuration 2
Capacitance tolerance(±20%)
Rated capacitance(15000µF)
Rated voltage(50V)
Series name
Type
0.8
+0.2
-0.1
0.8^+-00..21
6.3±1 ^ʢ10ʣ
1.5 ^+-00..12
(Lug terminal type)
Configuration
φ 35 to φ 40 φ 50 to φ 76
Dimension table in next page.
11±2
347
CAT.8100E