LGL2G271MELA30 Datasheet, PDF (1/2 Pages) Nichicon corporation – ALUMINUM ELECTROLYTIC CAPACITORS

ALUMINUM ELECTROLYTIC CAPACITORS
GL Snap-in Terminal Type, 105°C Ultra-Smaller-Sized
series
One rank smaller case sized than GG series.
Suited for equipment down sizing.
Compliant to the RoHS directive (2002/95/EC).
GG
Smaller
GL
Specifications
Item
Performance Characteristics
Category Temperature Range
– 25 to +105°C
Rated Voltage Range
400 450V
Rated Capacitance Range
120 to 1000µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
Tangent of loss angle (tan δ) ^{Rated voltage (V)}
tan δ (MAX.)
400
0.15
450
0.20
Measurement frequency : 120Hz at 20°C
Stability at Low Temperature
Rated voltage (V)
Impedance ratio
ZT/Z20 (MAX.)
Z – 25°C/ Z+20°C
400 450
8
Measurement frequency : 120Hz
Temperature : 20°C
Endurance
Shelf Life
Marking
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus
rated ripple current is applied for 2000 hours at 105°C,
the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000
hours and then performing voltage treatment based
on JIS C 5101-4 clause 4.1 at 20°C,
they shall meet the characteristic requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change
tan δ
Leakage current
Within ± 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
tan δ
Leakage current
Within ± 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Drawing
Polarity bar
Sleeve (P.E.T.)
L± ²
Pressure relief vent
4.0± 0.5
10 _{± 0.1}
10
0.8
+0.2
-0.1
0.8^+-00..21
Type numbering system (Example : 400V 150µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
LGL 2G 1 5 1 MEL Z 25
Configuration
Capacitance tolerance (± 20%)
Rated capacitance (150µF)
Rated voltage (400V)
Series name
Type
Case length code
Case dia. code
φD Code
22
Z
25
A
30
B
35
C
2-2φ ^{± 0.1}
(PC board hole dimensions)
1.5
+0.2
-0.1
(Terminal dimensions)
The other terminal is also available upon request.
Please refer page 280 for schematic of dimensions.
Frequency coefficient of rated ripple current
Frequency (Hz)
50
60
120
300
1k
10k 50k or more
Coeff. 400 · 450V
0.77
0.82
1.00
1.16
1.30
1.41
1.43
Minimum order quantity : 50pcs.
Dimension table in next page.
CAT.8100B