|
JUCOE105MED Datasheet, PDF (1/1 Pages) Nichicon corporation – ELECTRIC DOUBLE LAYER CAPACITORS | |||
|
ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP "
UC Radial Lead Type
series
Excellent in voltage holding property.
Suitable for quick charge and discharge.
Wide temperature range (â 25 ~ +70°C).
Adapted to the RoHS directive (2002/95/EC).
Specifications
Item
Performance Characteristics
Category Temperature Range
â 25 ~ +70°C
Rated Voltage Range
2.5V
Rated Capacitance Range 0.47 ~ 47F See Note
Capacitance Tolerance
± 20% (20°C)
Leakage Current
0.5C (mA) [ C : Rated Capacitance(F) ](After 30 minutes' application of rated voltage, 2.5V)
Stability at Low Temperature Capacitance (â 25°C) / Capacitance (+20°C) Ã100 70%
ESR, DCR*
Refer to the list below (20°C). *DC internal resistance
Endurance
Shelf Life
Marking
After an application of DC voltage for 1000 hours at 70°C,
capacitors meet the characteristic requirements listed at right.
Capacitance change
Internal resistance (ESR)
Leakage current
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
After storing the capacitors under no load at 70°C for 1000hours,
they will meet the characteristic requirements listed at right.
Capacitance change
Internal resistance (ESR)
Leakage current
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
Printed with white color letter on black sleeve.
Drawing
Sleeve (P.E.T.)
fd
Prerleiesfsvuerent L+ MAX
15MIN
4MIN
(mm)
fD 6.3 8 10 12.5 16 18
P 2.5 3.5 5.0 5.0 7.5 7.5
fd 0.5 0.6 0.6 0.6 0.8 0.8
In case L>25 for the f12.5 dia unit,lead dia fd=0.8
(fD < 10) 1.0
(fD 10) 1.5
⢠Please refer to page 21 for end seal configulation.
Dimensions
Rat(eCdoVdoelt)age CapRa(acFtie)tadnce
Code
(atE(1WSkR)Hz) D(WCR)
0.47
474
7
11
1.0
105
2
5
2.2
225
1
2
2.5V
(0E)
3.3
4.7
10
335
1
1.5
475
0.5
1
106
0.1 0.5
10
106
0.1 0.5
22
226
0.1 0.3
33
336
0.1 0.2
47
476
0.1 0.2
Type numbering system (Example : 2.5V 1F)
J1 U2 C3 04 E5 16 07 58 M9 P10 D11
Configuration
f D PPbb--ffrreeee lPeEaTd fsinleisehvieng
6.3
ED
8, 10
PD
12.5 ~ 18
HD
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (1F)
Rated voltage (2.5V)
Series name
Type
f CDa´seL s(mizem)
6.3 ´ 11
8 ´ 11.5
8 ´ 20
10 ´ 20
12.5 ´ 20
12.5 ´ 31.5
10 ´ 40
16 ´ 31.5
18 ´ 31.5
18 ´ 40
Note :
To calculate capacitance, the capacitor must be charged at
the rated voltage of 2.5V for 30 minutes. Measure the time of
duration âT (sec.) it takes go from 2V to 1V when a constant
current discharge of i (A) = 0.01 Ã nominal capacitance is
carried out. It is then possible to calculate capacitance based
on the calculation provided below.
Capacitance (F) = I Ã âT
CAT.8100V
|