JJCOE156MEL Datasheet, PDF (1/1 Pages) Nichicon corporation – ELECTRIC DOUBLE LAYER CAPACITORS

ELECTRIC DOUBLE LAYER CAPACITORS "EVerCAP "
JC Snap-in Terminal Type
series
Excellent in voltage holding property.
Suitable for quick charge and discharge.
Wild temperature range (– 25°C ~ + 60°C).
Adapted to the RoHS directive (2002/95/EC).
Specifications
Item
Category Temperature Range
– 25 ~ +60°C
Performance Characteristics
Rated Voltage Range
2.5V
Rated Capacitance Range 15 ~ 150F See Note
Capacitance Tolerance
± 20% (20°C)
Leakage Current
0.5C (mA) [ C : Rated Capacitance(F) ] (After 30 minutes' application of rated voltage, 2.5V)
Stability at Low Temperature _{Capacitance (}– 25°C) / _{Capacitance (+}20°C) ×₁₀₀ 70%
ESR, DCR*
Refer to the list below (20°C). *DC internal resistance
Endurance
After an application of DC voltage for 2000 hours at 60°C,
capacitors meet the characteristic requirements listed at right.
Capacitance change
ESR
Leakage current
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
Shelf Life
Marking
After storing the capacitors under no load at 60°C for
2000 hours, they will meet the characteristic
requirements listed at right.
Printed with white color letter on black sleeve.
Capacitance change
ESR
Leakage current
Within ±30% of initial value
300% or less of initial specified value
Initial specified value or less
Drawing
Polarity bar
Sleeve (P.E.T.)
Type numbering system (Example : 2.5V 120F)
J¹ J² C³ 0⁴ E⁵ 1⁶ 2⁷ 7⁸ M⁹ E^{10 1}L¹ C¹²
L±²
Pressure relief vent
10±_0.1
10
4.0±0.5
0.8 ^+-00..12
0.8^+-00..21
2-2 f±^0.1
(PC board hole dimensions)
Dimensions
Rated
Voltage
( code )
Cap.
(F)
15
Cap.
code
ESR(mΩ)
(at 1kHz )
DCR(mΩ)
156 120 500
18 186 120 400
22 226 90 300
27 276 90 250
33 336 80 200
2.5V
(0E)
39 396 80 200
47 476 70 160
56 566 70 140
68 686 60 110
82 826 60 100
100 107 50 90
120 127 50 70
150 157 40 60
1.5 ^+-00..12
(Terminal dimensions)
φ 22 (Z)
22 × 20
22 × 30
22 × 35
22 × 40
Case size φ D × L (mm)
φ 25 (A)
φ 30 (B)
25 × 20
25 × 30
25 × 30
25 × 35
25 × 40
30 × 20
30 × 20
30 × 30
25 × 50
30 × 40
30 × 50
φ 35 (C)
35 × 20
35 × 20
35 × 30
35 × 35
35 × 40
35 × 50
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (120F)
Rated voltage (2.5V)
Series name
Type
Case dia. code
fD Code
22 Z
25 A
30 B
35 C
Note :
To calculate capacitance, the capacitor must be charged
at the rated voltage of 2.5V for 30 minutes. Measure the
time of duration ∆T (sec.) it takes go from 2V to 1V when
a constant current discharge of i (A) = 0.01 × nominal
capacitance is carried out. It is then possible to calculate
capacitance based on the calculation provided below.
Capacitance (F) = I × ∆T
CAT.8100V