GYA Datasheet, PDF (1/1 Pages) Nichicon corporation – CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS

CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS
GYA^{Chip Type, 125°C High Reliability}
High Reliability, Low ESR,High ripple current.
Long life of 4000 hours at 125°C.
Adapted to the RoHS directive (2011/65/EU).
NEW
Specifications
Item
Performance Characteristics
Category Temperature Range – 55 to +125°C
Rated Voltage Range
25 to 63V
Rated Capacitance Range 10 to 330µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA).
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
25
0.14
35
0.12
50
0.10
63 120Hz 20°C
0.08
ESR
Endurance
Less than or equal to the specified value at 100kHz, 20°C
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 4000 hours at 125°C, the peak
voltage shall not exceed the rated voltage.
Capacitance change
tan δ
ESR
Leakage current
Within ± 30% of initial capacitance value
200% or less of the initial specified value
200% or less of the initial specified value
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Damp Heat
(Steady State)
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 1000 hours at 85°C, 85% RH.
Capacitance change
tan δ
Leakage current
Within±30% of the initial capacitance value
200% or less of the initial specified value
Less than or equal to the initial specified value
Resistance to
Soldering Heat
Marking
Dimensions
Voltage (V:35V) Series
Lot No.
Capacitance
After solderling the Capacitor, After restored at room temperature,
they meet the characteristics requirements listed below.
Black print on the case top.
Capacitance change
tan δ
Leakage current
Within±10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Plastic platform
0.3 MAX.
C±0.2
Positive
L±0.3
10L : ±0.5
H
Negative
Type numbering system (Example : 35V 47µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
GY A 1 V 4 7 0 MCQ 1 GS
Taping code
Size code
Configuration
Capacitance tolerance (±20%)
Rated capacitance (47µF)
Rated voltage (35V)
Series name
Type
(mm)
φD×L _{φ6.3 × 5.8 φ6.3 × 7.7 φ8 × 10 φ10 × 10}
A
7.3
7.3
9.0
11.0
B
6.6
6.6
8.3
10.3
C
6.6
6.6
8.3
10.3
E
2.2
2.2
3.1
4.5
L
5.8
7.7
10.3
10.3
H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1
Voltage
V
25
35
50
63
Code E
V
H
J
Specifications
Cap. (µF)
10
22
33
47
56
68
100
150
220
270
330
V
25
35
50
63
Code
1E
1V
1H
1J
100
6.3 × 5.8 120 700
220
6.3 × 5.8 80 750 6.3 × 7.7 80 900
330
6.3 × 7.7 40 1100 8 × 10 40 1100
470
6.3 × 5.8 60 900
560 6.3 × 5.8 50 900
10 × 10 30 1400
680
6.3 × 7.7 35 1400 8 × 10 30 1250
101 6.3 × 7.7 30 1400
10 × 10 28 1600
151
8 × 10 27 1600
221 8 × 10 27 1600
271
10 × 10 20 2000
331 10 × 10 20 2000
φD×L ^{ESR Ripple}
mΩ mArms
ESR:100kHz,20°C
Rated ripple Current 100kHz,125°C