EMVH350ARA471MKG5S Datasheet, PDF (1/2 Pages) Nichicon corporation – SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS

SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
High heat resistance, 125℃
MVH AIchip^TM-
Series
・Lower ESR, Higher ripple current
・Endurance : 1,000 to 5,000 hours at 125℃
・Suitable to fit for automotive equipment
・Solvent resistant type except 63 to 450Vdc (see PRECAUTIONS AND GUIDELINES)
・Vibration resistant structure
・RoHS Compliant
MVH
125℃
MVE P70
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range ^{-40 to +125℃}
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
10 to 450Vdc
±20% (M)
(at 20℃, 120Hz)
Rated voltage (Vdc)
10 to 100Vdc
160 to 450Vdc
F60 to JA0
KE0 to MN0
I=0.01CV or 3µA, whichever is greater.
I=0.03CV or 4µA, whichever is greater.
I=0.04CV+100
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V
tanδ(Max.) ^{F60 to JA0}
0.24 0.20 0.16 0.14 0.14 0.12 0.12 0.10
-
-
KE0 to MN0
0.22 0.18 0.16 0.14 0.12 0.14 - 0.10
0.20
0.24
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
Rated voltage (Vdc)
10V 16V 25V 35V 50V 63V 80V 100V 160 to 250V 400 & 450V
Z(-25℃)/Z(+20℃) 3
2
2
2
2
2
2
2
-
-
F60 to JA0 _{Z(-40℃)/Z(+20℃) 6}
4
4
3
3
3
3
3
-
-
KE0 to MN0
Z(-25℃)/Z(+20℃)
Z(-40℃)/Z(+20℃)
4
8
3
6
2
4
2
3
2
3
2-
3-
2
3
3
6
6
10
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for the specified
time at 125℃.
F60 to H63 (10 to 100Vdc) : 1,000hours
Time
HA0 to JA0 (10 to 100Vdc) : 2,000hours
KE0 to MN0 (10 to 100Vdc) : 5,000hours
KE0 to MN0 (160 to 450Vdc) : 2,000hours
Capacitance change ≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours (500 hours
for 400 to 450Vdc) at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage
according to Item 4.1 of JIS C 5101-4.
Rated voltage(Vdc)
10 to 50Vdc
63 to 450Vdc
Capacitance change ≦±30% of the initial value
≦±30% of the initial value
D.F. (tanδ)
≦300% of the initial specified value ≦300% of the initial specified value
Leakage current
≦The initial specified value
≦500% of the initial specified value
◆DIMENSIONS [mm]
● Terminal Code : A
● Size code : F60 to MN0
Vent
(Except F60 to HA0)
W
0.3max.
A±0.2
L±0.5 (Note)
Note : L±0.3 for F60 and F80
● Terminal Code : G(Vibration resistant structure)
● Size code : HA0 to MN0
Size code D L A B C
W
P
Vent
0.3max.
W
(Except HA0)
F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9
F80 6.3 7.7 6.6 6.6 7.2 0.5 to 0.8 1.9
H63
8 6.3 8.3 8.3 9.0 0.5 to 0.8 2.3
HA0
8 10.0 8.3 8.3 9.0 0.7 to 1.1 3.1
JA0
10 10.0 10.3 10.3 11.0 0.7 to 1.1 4.5
KE0 12.5 13.5 13.0 13.0 13.7 1.0 to 1.3 4.2
KG5 12.5 16.0 13.0 13.0 13.7 1.0 to 1.3 4.2
L±0.5
A±0.2
LH0
16 16.5 17.0 17.0 18.0 1.0 to 1.3 6.5
LN0
16 21.5 17.0 17.0 18.0 1.0 to 1.3 6.5
MH0 18 16.5 19.0 19.0 20.0 1.0 to 1.3 6.5
: Dummy terminals MN0 18 21.5 19.0 19.0 20.0 1.0 to 1.3 6.5
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E MVH AAA A AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 4.7µF:4R7,10µF:100)
Taping·Tray code
Terminal code (A, G)
Voltage code (ex. 10V:100,50V:500, 100V: 101)
Series code
Category
◆MARKING
F60 to JA0
EX) 35V47µF
74H
47
35V
KE0 to MN0
EX) 16V1,000µF
0V
MVH
1000
16V
Please refer to "Product code guide (surface mount type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
94
CAT. No. E1001N