NSTM515AS Datasheet, PDF (4/15 Pages) List of Unclassifed Manufacturers – SPECIFICATIONS FOR NICHIA FULL COLOR LED

Nichia STSE-CM2199B
<Cat.No.030526>
6.RELIABILITY
(1) TEST ITEMS AND RESULTS
Standard
Test Item
Test Method
Resistance to
JEITA ED-4701
Soldering Heat
300 302
Solderability
JEITA ED-4701
300 303
Thermal Shock
JEITA ED-4701
300 307
Temperature Cycle
JEITA ED-4701
100 105
Moisture Resistance Cyclic JEITA ED-4701
200 203
Terminal Strength
JEITA ED-4701
(bending test)
400 401
Terminal Strength
JEITA ED-4701
(pull test)
400 401
High Temperature Storage JEITA ED-4701
200 201
Temperature Humidity
JEITA ED-4701
Storage
100 103
Low Temperature Storage JEITA ED-4701
200 202
Steady State Operating Life
Steady State Operating Life
of High Humidity Heat
Steady State Operating Life
of Low Temperature
! Value for one LED device (Single color).
Test Conditions
Tsld=260 ± 5°C, 10sec.
3mm from the base of the epoxy bulb
Tsld=235 ± 5°C, 5sec.
(using flux)
0°C ~ 100°C
15sec. 15sec.
-40°C ~ 25°C ~ 100°C ~ 25°C
30min. 5min. 30min. 5min.
25°C ~ 65°C ~ -10°C
90%RH 24hrs./1cycle
Load 5N (0.5kgf)
0° ~ 90° ~ 0° bend 2 times
Load 10N (1kgf)
10 ± 1 sec.
Ta=100°C
Ta=60°C, RH=90%
Ta=-40°C
! Ta=25°C,
B,G IF=12mA
R IF=20mA
! 60°C, RH=90%, B,G IF=8.5mA
R IF=13mA
! Ta=-20°C,
B,G IF=8.5mA
R IF=13mA
Note
1 time
Number of
Damaged
0/100
1 time
over 95%
100 cycles
0/100
0/100
100 cycles 0/100
10 cycles 0/100
No noticeable
damage
No noticeable
damage
1000hrs.
0/100
0/100
0/100
1000hrs. 0/100
1000hrs. 0/100
1000hrs.
0/100
500hrs.
0/100
1000hrs. 0/100
(2) CRITERIA FOR JUDGING THE DAMAGE (Value for one LED device (Single color).)
Criteria for Judgement
Item
Symbol Test Conditions
Min.
Max.
Forward Voltage
VF B,G,R IF=20mA
-
U.S.L.*)$ 1.1
Reverse Current
IR B,G,R VR=5V
-
U.S.L.*)$ 2.0
Luminous Intensity
IV B,G,R IF=20mA L.S.L.**)$ 0.7
-
*) U.S.L. : Upper Standard Level
**) L.S.L. : Lower Standard Level
-3-