NLPG01S02-E Datasheet, PDF (3/12 Pages) NICHIA CORPORATION – SPECIFICATIONS FOR NICHIA LUMINOUS INTENSITY GREEN STANDARD LED

5.PRODUCT CONSTRUCTION
Please refer to “PRODUCT CONSTRUCTION” on the following page.
Nichia STS-DA1-0559
<Cat.No.081105>
6.OUTLINE DIMENSIONS
Please refer to “OUTLINE DIMENSIONS” on the following page.
7.PRODUCT IDENTIFICATION
Please refer to “PRODUCT IDENTIFICATION ” on the following page.
8.INTERNAL CIRCUIT
Please refer to “INTERNAL CIRCUIT” on the following page.
9.PACKING
Please refer to “PACKING” on the following page.
10.DIRECTIONS OF USE
(1) Connecting
· The following figure shows how the Luminous Intensity Standard LED is connected.
Temperature controller
Standard LED
Constant current power
supply for LED drive
Digital multimeter
(Vf measurements)
Recommended specifications for the peripheral equipments
Temperature controller
PID controller.
Temperature measurement accuracy of ± 0.03°C.
Constant current power supply
Drive current accuracy: ≤ 0.1% of the set current
for LED drive
Digital multimeter (Vf measurements)
Input impedance: ≥ 1 GΩ
Please refer to “INTERNAL CIRCUIT” on the following page for circuit wiring.
-2-