NPYT Datasheet, PDF (5/6 Pages) NIC-Components Corp. – Interference Suppression Capacitor

Interference Suppression Capacitor
NPYT Series
ENVIRONMENTAL CHARACTERISTICS
Item
Test Method
Endurance
+110°C±2°C, 170% of RV for 1,000 hours
(Voltage applied through 47W ± 5% resistor, every hour voltage is
increased to 1,000Vrms for 0.1 seconds).
Moisture Resistance
+40°C±2°C, Rated Voltage, 87% ~ 93% RH, 500 hours.
(Part stablized at room temperature for 1.5 ± 0.5 hours before
taking measurements)
Standard
Physical: No remarkable physical
Capacitance: Within ±10% of initial measured value
DF: 0.8% max.
IR > 50% of specified value
Physical: No remarkable physical
Capacitance: Within ±5% of initial measured value
DF: < 0.2%, IR > 50% of specified value
Temperature
Cycling
A total of 5 cycles.
Each cycle includes:
1. +20 ± 2°C for 3 minutes
2. -40 ± 3°C for 30 minutes
3. +20 ± 2°C for 3 minutes
4. +110 ± 3°C for 30 minutes
5. +20 ± 2°C for 3 minutes
After test allow parts to stablized at room temperature for
1.5 ± 0.5 hours before taking measurements.
Physical: No remarkable physical
Capacitance: Within ±5% of initial measured value
DF: < 0.2%, IR > 50% of specified value
Resistance to
Dry Heat
Resistance to
Cold
Resistance to
Soldering Heat
Vibration
Terminal
Strength
Bending
Strength
+110 ± 2°C for 16 +1/-0 hours
-40°C ± 3°C for 2 hours ± 1 hours
Preheat: +100°C ~ +120°C (60 seconds max). Ramp-up rate: 3°C
per second max. Peak soldering temperature: +260 ± 5°C for 5
seconds max. Immersion depth: 4.8mm max from base of
component (Part stablized at room temperature for 1.5 ± 0.5 hours
before taking measurements)
Frequency: 10-55-10Hz
Magnitude: 1.5mm in X, Y and Z directions
Duration: 2 +1/-0 hours in each direction
Apply 1.0Kg of force for 10 ± 1 seconds to the terminal in the axial
direction away from the body of the part.
Apply 0.5Kg of force for 2 cycles. Each cycle includes 90° once,
return to original position for 2 ~ 3 seconds and then bend in the
opposite direction.
Physical: No remarkable physical
Capacitance: Within ±5% of initial measured value
DF: < 0.2%, IR > 50% of specified value
Physical: No remarkable physical
Capacitance: Within ±5% of initial measured value
DF: < 0.2%, IR > 50% of specified value
Physical: No remarkable physical
Capacitance: Within ±5% of initial measured value
DF: < 0.2%, IR > 50% of specified value
No short/open circuit and stable connection
No abnormalities
No abnormalities
DATE CODE MARKING
Year Month Code Year
Jan. n
Feb. p
Mar q
Apr. r
May s
2016
Jun.
Jul.
t
u
2017
Aug. v
Sept. w
Oct. x
Nov. y
Dec. z
Month Code Year
Jan. A
Feb. B
Mar C
Apr. D
May E
Jun.
Jul.
F
G
2018
Aug. H
Sept. J
Oct. K
Nov. L
Dec. M
Month
Jan.
Feb.
Mar
Apr.
May
Jun.
Jul.
Aug.
Sept.
Oct.
Nov.
Dec.
Code
N
P
Q
R
S
T
U
V
W
X
Y
Z
Year
2019
Month
Jan.
Feb.
Mar
Apr.
May
Jun.
Jul.
Aug.
Sept.
Oct.
Nov.
Dec.
Code
a
b
c
d
e
f
g
h
j
k
l
m
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
5
SPECIFICATIONS ARE SUBJECT TO CHANGE