NSPE-TZ Datasheet, PDF (3/3 Pages) NIC-Components Corp. – Hybrid Aluminum Electrolytic Capacitors

Hybrid Aluminum Electrolytic Capacitors
NSPE-TZ Series
RECOMMENDED REFLOW SOLDERING PROFILE*
260
230
200
150
100
50
Peak Temperature
Time Above 230°C (40 seconds max.)
Time Above 217°C (80 seconds max.)
Preheat - +160°C for
120 seconds max.
Time Above 200°C
(100 seconds max.)
Time (Seconds)
PEAK TEMPERATURE AND DURATION
Diameter
φ6.3 ~ 10mm
Peak Temperature
(5 seconds max.)
+260°C
Time above Time above Time above
230°C
217°C
200°C
40 sec. max. 80 sec. max. 100 sec. max.
*Two reflow passes are permissible with a cool down to room temperature required between
the first and second pass. Acceptable soldering methods are IR or IR & heated air.
Capacitors placed on a +250°C hot plate for 30 seconds with their
electrode terminals facing downward will fulfill the following conditions
Resistance to ^{after being cooled to room temperature}
Soldering
Capacitance Change Within ± 10% of the initial measured value
Heat
Dissipation Factor Less than maximum specified value
Leakage Current Less than maximum specified value
ESR
Less than 130% of maximum specified value
TAPING SPECIFICATIONS (mm)
1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets.
2. Leader tape: Approximately 20cm of cover tape at leader.
3. Connection: Maximum 3 connections (slices) per reel.
4 + 0.1
Case Size
A
±0.5
B
±0.5
C
±0.3
D
±0.1
P
±0.1
T
±0.2
t
max.
6.3x6.3 7.0 7.0 16.0 7.5 12.0 6.5 0.6
6.3x8 7.0 7.0 16.0 7.5 12.0 8.2 0.6
8x10.8 8.7 8.7 24.0 11.5 16.0 11.1 0.6
10x10.8 10.7 10.7 24.0 11.5 16.0 11.2 0.6
A
10x12.8 10.7 10.7 24.0 11.5 16.0 13.3 0.6
1₁.5_.5∅_φ+₊0₀._.1₁/-_/-0
1.75 + 0.15
1.75 ±
t
-
+
P
Feeding
T
REEL DIMENSIONS (mm)
Case Size
W
±1.0
Qty per Reel
13" (330mm) 15" (380mm)
6.3x6.3 18
800
6.3x8 18
500
8x10.8 26
300
10x10.8 26
300
10x12.8 26
300
1,000
900
500
500
400
2mm ± 0.5mm
φ13mm ± 0.5mm
φ330mm ± 2.0mm
φ380mm ± 2.0mm
φ21mm ± 0.8mm
3mm
W
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
3