NPC_14 Datasheet, PDF (3/4 Pages) NIC-Components Corp. – Surface Mount Solid Polymer Aluminum Electrolytic Capacitors

Surface Mount Solid Polymer Aluminum
Electrolytic Capacitors
NPC Series
PART NUMBERING SYSTEM
NPC 101 M 6.3 D7 X A TR 500 F
RoHS Compliant
Optional 500 piece reel qty
Tape & Reel Packaging
Denotes +260°C Peak Reflow
Performance Code (see Standard Products & Specifications Tables)
Case Size
Working Voltage (Vdc)
Tolerance Code M=20%, K=10%
Capacitance Code in μF, first 2 digits are
significant, third digits no. of zeros
Series
DIMENSIONS (mm)
Case Code L ±0.2 W ±0.2
D1
D5
D6
7.3
4.3
D7
D8
H ±0.1
1.4
1.1
1.9*
2.7
2.9
W1 ±0.1
2.4
S ±0.2
1.2
*D6 - See Standard Products & Specifications Tables
for height tolerance.
Anode Polarity
Indicator
L
+
H
S
W₁
W
Capacitance Value
Lot Number
W1
Voltage Code
TERMINATION MATERIAL:
Cu: 100 ±8μm
VOLTAGE CODES
Voltage Code
2.0VDC
d
2.5VDC
e
4.0VDC
g
6.3VDC
j
8.0VDC
k
10VDC
A
Au: 0.003 ~ 0.014μm
Pd: 0.02 ~ 0.07μm
Ni: 0.5 ~ 2.0μm
Ni: 0.5 ~ 2.0μm
Pd: 0.02 ~ 0.07μm
Au: 0.003 ~ 0.014μm
RECOMMENDED LAND PATTERNS (mm)
Case Code
a
b
c
D1, D5, D6, D7, D8 2.4
2.9
3.7
B
A
C
A
RECOMMENDED REFLOW SOLDERING PROFILE
Peak Temperature
260
250
260°C Max. for 10 sec.
230
NATURAL COOLING
200
Time Above 230°C
160
40 sec. max.
Pre-Heat
30 sec. max.
160^oC ~ 180°C
100
120 Sec. Max.
APPLICATION NOTES:
1. NPC Series cannot be used in coupling, time-constant or other
circuits that are greatly affected by leakage current.
2. NPC parts are polarized so be sure to verify component orientation
when mounting components.
3. Do not apply over voltage exceeding the rated voltage.
4. Do not apply ripple current over the specified maximum ripple current
rating.
50
TIME (SECONDS)
NOTES ON REFLOW SOLDERING:
1. SAC alloy (+217°C) reflow soldering compatible
2. Soldering heat limits apply to the top surface of component
3. If you have concerns about your reflow soldering profile
review them with NIC to insure compatible [[e-mail]]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
3