NTC-T475K16TRB Datasheet, PDF (1/5 Pages) NIC-Components Corp. – Tantalum Chip Capacitors

Tantalum Chip Capacitors
FEATURES
• MOLDED CONSTRUCTION FOR HIGH SOLDERING HEAT RESISTANCE
• NINE CASE SIZES WITH MANY NEW EXTENDED RANGE RATINGS
• BOTH FLOW AND REFLOW SOLDERING APPLICABLE
• TAPE AND REEL PACKAGING COMPATIBLE WITH AUTOMATIC
PICK AND PLACE EQUIPMENT
NCeawse0S6i0z3e
SPECIFICATIONS AND PERFORMANCE CHARACTERISTICS
Capacitance Range
0.1µF to 470µF
Capacitance Tolerance
±20%(M), ±10%(K)
Rated Voltage Range @ 85C (Vdc)
2.5 4.0 6.3 10 16 20 25 35 50
Surge Voltage Rating @ 85°C (Vdc)
3.3 5.2 8.0 13 20 26 33 46 65
Derated Voltage@ 125°C (Vdc)
1.6 2.5 4.0 6.3 10 13 16 22 32
Operating Temperature Range
-55^oC to + 85^oC (to +125^oC With Derating)
Dissipation Factor
See Case Size and Specifications Table
Leakage Current @ +25^oC
(After 5 Minutes at Rated Voltage)
Capacitance Change
With Temperature
A2, A, B2, B, C, D & E Case Size
J & P Case Size
Soldering Heat Resistance
(+260^oC for 5 Seconds)
Not More Than 0.01 CV or 0.5µA, whichever is greater
-55°C
+85°C
+125°C
∆C -12%
∆C ±12%
∆C ±15%
∆C -20%
∆C ±20%
∆C ±20%
∆C ±5%* Max., LC = Less than initial specification.
DF = Less than initial specification.
Moisture Resistance
(500 hours; 90~95% RH @ 40^oC)
∆C ±5%* Max., LC = Less than initial specification.
DF = 150% of initial specification
Temperature Cycling
(5 cycles; -55^oC ~ +125^oC)
∆C ±5%* Max, LC = Less than initial specification.
DF = Less than initial specification
Load Life (At Rated Voltage)
(2000 hours @ +85^oC)
∆C ±10%* Max, LC = 125% of initial specification.
DF = Less than initial specification
Base Failure Rate (1.0Ω/Volt)
1%/1000 hours at 60% confidence level. (+85°C)
*±12% ~ ±15% for extended values, ±20% for J & P case size values
NTC-T Series
RIPPLE CURRENT CORRECTION FACTOR:
Ambient Temperature +25°C +55°C +85°C +105°C +125°C
Correction Factor 1.0 0.90 0.80 0.40 0.15
RIPPLE CURRENT/VOLTAGE RATINGS:
Tmax. =
Pd
ESR
V max. = Z • ^Pd
ESR
Tmax. = Ripple Current rating (Arms)
Pd = Power dissipation (watt)
ESR = Equivalent series resistance (ohm)
V max. = Ripple voltage rating (Vrms)
Z = The capacitors impedance (ohm) = (ESR)²+(XL-XC)²
®
POWER DISSIPATION @ 25°C (FREE AIR) &
EQUIVALENT SERIES INDUCTANCE (ESL)
Case Pd MAX. ESL
Code
(W)
(nH)
P
0.025 1.00
A2
0.050 1.20
A
0.070 1.20
B2
0.070 1.50
B
0.080 1.50
C
0.110 2.70
D
0.150 3.00
E
0.165 3.00
PART NUMBERING SYSTEM
NTC-T 106 M 16 TR B
Series
Case Code
Packaging: TR=Tape/Reel
Voltage
Tolerance Code: K=±10%, M=±20%
Capacitance Code
124 NIC COMPONENTS
www.niccomp.com
www.lowESR.com
www.RFpassives.com