NRSZ Datasheet, PDF (1/5 Pages) NIC-Components Corp. – Miniature Aluminum Electrolytic Capacitors

Miniature Aluminum Electrolytic Capacitors
NRSZ Series
LOW IMPEDANCE AT HIGH FREQUENCY RADIAL LEADS, POLARIZED
ALUMINUM ELECTROLYTIC CAPACITORS
RoHS
FEATURES
• VERY LOW IMPEDANCE
• LONG LIFE AT 105^OC (2000 ~ 5000 hrs.)
• HIGH STABILITY AT LOW TEMPERATURE
Compliant
includes all homogeneous materials
*See Part Number System for Details
• IDEALLY FOR USE IN SWITCHING POWER SUPPLIES AND
..CONVERTORS
CHARACTERISTICS
Rated Voltage Range
Capacitance Range
Operating Temperature Range
Capacitance Tolerance
Max. Leakage Current @ 20°C
After 1 min.
After 2 min.
Max. Tanδ ~ 120Hz/20°C
Low Temperature Stability
Impedance Ratio @ 120Hz
Load Life Test at Rated W.V. & 105°C
5,000 hours: 12.5φ
3,000 hours: 8 ~ 10φ
2,000 hours: 5 ~ 6.3φ
Shelf Life Test
105°C for 1,000 hours
No Load
6.3 ~ 100VDC
0.47 ~ 12,000µF
-55 ~ +105°C
LOW IMPEDANCE
NRSZ NRSY
(today’s standard) (reduced sizes)
±20% (M)
0.03CV or 4µA, whichever is greater
0.01CV or 3µA, whichever is greater
W.V. (VDC)
6.3 10 16 25 35 50
63 100
S.V. (VDC)
8 13 20 32 44 63 79 125
C < 1,200µF
C = 1,500µF
C = 1,800µF
C = 2,200µF
C = 2,700µF
C = 3,300µF
C = 3,900µF
C = 4,700µF
C = 5,600µF
C = 6,800µF
C = 8,200µF
C = 10,000µF
C = 12,000µF
Z-25°C/Z+20°C
0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
0.23 0.20 0.17 0.15 0.13 0.11 - -
0.23 0.20 0.17 0.15 0.13 0.11 - -
0.24 0.21 0.18 0.16 0.14 - - -
0.25 0.22 0.19 0.17 0.15 - - -
0.26 0.23 0.20 0.18 0.16 - - -
0.28 0.25 0.22 0.20 - - - -
0.29 0.26 0.23 0.21 - - - -
0.31 0.28 0.25 - - - - -
0.33 0.30 0.27 - - - - -
0.36 0.33 - - - - - -
0.40 - - - - - - -
0.44 - - - - - - -
32222222
Z-40°C/Z+20°C
43333333
Capacitance Change
Within ±20% of initial measured value
Tanδ
Less than 200% of specified maximum value
Leakage Current
Less than specified maximum value
Capacitance Change
Tanδ
Leakage Current
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
*NRSZ102M6.3V8X20 is 4,500 Hours @ 105°C
Unless otherwise specified here, capacitor shall meet JIS C-5141 Characteristics W.
RIPPLE CURRENT CORRECTION FACTORS
Frequency (Hz) Cap. (µF)
120
1K
10K
0.47 ~ 4.7
0.40
0.68
0.78
5.6 ~ 47
0.50
0.76
0.87
Multiplier
56 ~ 270
0.70
0.85
0.90
330 ~ 1000 0.80
0.93
0.98
1200 ~ 12000 0.90
0.95
1.0
100K
1.00
1.00
1.00
1.00
1.0
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
®
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com
www.SMTmagnetics.com
85