NRLRW Datasheet, PDF (1/11 Pages) NIC-Components Corp. – Large Can Aluminum Electrolytic Capacitors

Large Can Aluminum Electrolytic Capacitors _{NRLRW Series}
FEATURES
• EXPANDED VALUE RANGE
• LONG LIFE AT +105°C (3,000 HOURS)
• HIGH RIPPLE CURRENT
• LOW PROFILE, HIGH DENSITY DESIGN
• SUITABLE FOR SWITCHING POWER SUPPLIES
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
SPECIFICATIONS
Operating Temperature Range
-40 ~ +105°C
-25 ~ +105°C
Rated Voltage Range
10 ~ 100Vdc
160 ~ 450Vdc
Rated Capacitance Range
560 ~ 56,000µF
47 ~ 2,700µF
Capacitance Tolerance
±20% (M)
Max. Leakage Current (µA)
After 5 minutes (20°C)
3 x C(µF)V
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc)
Tan δ max.
10 16
25
35 50 63 80 100 160~400 420~450
0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15
0.20
W.V. (Vdc)
10 16
25
35 50 63 80 100 160
180
Surge Voltage
S.V. (Vdc)
W.V. (Vdc)
13 20
32
44 63 79 100 125 200
220
200 220 250 315 350 385 400 420 450
-
S.V. (Vdc)
250 270 300 365 400 435 450 470 500
-
Ripple Current
Correction Factors
Frequency (Hz)
50
(60)
120
500
1K 10K> -
-
-
-
-
10 ~ 100Vdc 0.90 1.00 1.05 1.10 1.15 -
-
-
-
-
Multiplier
at 85°C
160 ~ 250Vdc
0.80
1.00
1.20
1.30 1.50
-
-
-
-
-
315 ~ 450Vdc 0.80 1.00 1.20 1.25 1.40 -
-
-
-
-
Low Temperature
Stability (10 to 250Vdc)
Temperature (°C)
0 -25 -40
-
--
-
-
-
-
Capacitance Change -5% -15% -30% -
--
-
-
-
-
Impedance Ratio
1.5 3
12
-
--
-
-
-
-
Load Life Test
3,000 hours at +105°C
Capacitance Change
Tan δ
Leakage Current
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Shelf Life Test
1,000 hours at +105°C
(no load)
Capacitance Change
Tan δ
Leakage Current
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Surge Voltage Test
Capacitance Change
Within ±20% of initial measured value
Per JIS-C-5141 (table #6, #4)
Surge voltage applied: 30 seconds
"On" and 5.5 minutes no voltage "Off"
Tan δ
Leakage Current
Less than 200% of specified maximum value
Less than specified maximum value
Soldering Effect
Refer to
JISC5102.8.5
Capacitance Change
Tan δ
Leakage Current
Within ±10% of initial measured value
Less than specified maximum value
Less than specified maximum value
MECHANICAL CHARACTERISTICS:
1. Safety Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can which is normally covered by a PVC patch for the purpose of
insulation. The vent is designed to rupture in the event that high internal gas pressure is developed by circuit malfunction or mis-use like reverse
voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period
of 30 seconds.
Recommended PC Board Mounting Holes:
PART NUMBER SYSTEM
NRLRW 682 M 16V 20X25 S F
Sleeve Color: Dark Blue
∅= 2 ± 0.1
Series
Pb-free/RoHS compliant
Insulation Sleeve and Minus
Lead Length (S=4mm, L=6mm) _{Can Top Safety Vent} ^{Polarity Marking}
Case Size (mm)
Voltage Rating
Tolerance Code
D+1
Max.
(-)
(+)
Chassis
Capacitance Code
L±2
10
4.0 ± 1
or
6.3 ± 1
PC Board
D∅ ± 0.5
10 ± .1
Approx.
3.0mm
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
®
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
MAXIMUM EXPANSION FOR
Notice for Mounting
SAFETY VENT
The space from the top of the can shall be more than (3mm) from chassis or
other construction materials so that safety vent has room to expand in case
of emergency.
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
167