NRLR Datasheet, PDF (1/11 Pages) NIC-Components Corp. – Large Can Aluminum Electrolytic Capacitors

Large Can Aluminum Electrolytic Capacitors
NRLR Series
FEATURES
• EXPANDED VALUE RANGE
• LONG LIFE AT +85°C (3,000 HOURS)
• HIGH RIPPLE CURRENT
• LOW PROFILE, HIGH DENSITY DESIGN
• SUITABLE FOR SWITCHING POWER SUPPLIES
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
SPECIFICATIONS
Operating Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Max. Leakage Current (µA)
After 5 minutes (20°C)
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc)
Tan δ max.
W.V. (Vdc)
Surge Voltage
S.V. (Vdc)
W.V. (Vdc)
S.V. (Vdc)
Frequency (Hz)
Ripple Current
Correction Factors
10 ~ 100Vdc
Multiplier
at 85°C
160 ~ 250Vdc
315 ~ 450Vdc
Low Temperature
Stability (10 to 250Vdc)
Temperature (°C)
Capacitance Change
Impedance Ratio
Load Life Test
3,000 hours at +85°C
Capacitance Change
Tan δ
Leakage Current
Shelf Life Test
1,000 hours at +85°C
(no load)
Capacitance Change
Tan δ
Leakage Current
Surge Voltage Test
Per JIS-C-5141 (table #6, #4)
Surge voltage applied: 30 seconds
"On" and 5.5 minutes no voltage "Off"
Capacitance Change
Tan δ
Leakage Current
Soldering Effect
Refer to
JISC5102.8.5
Capacitance Change
Tan δ
Leakage Current
10
0.55
10
13
200
250
50 (60)
0.90
0.80
0.80
0
-5%
1.5
-40 ~ +85°C
10 ~ 250Vdc
180 ~ 82,000µF
±20% (M)
-25 ~ +85°C
315 ~ 450Vdc
56 ~ 1,000µF
3 x C(µF)V
16
0.50
16
20
220
270
120
1.00
1.00
1.00
-25
-15%
3
25 35 50 63 80 100 160~400
0.45 0.40 0.35 0.30 0.25 0.20 0.15
25 35 50 63 80 100 160
32 44 63 79 100 125 200
250 315 350 385 400 420 450
300 365 400 435 450 470 500
500 1K 10K> -
-
-
-
1.05 1.10 1.15 -
-
-
-
1.20 1.30 1.50 -
-
-
-
1.20 1.25 1.40 -
-
-
-
-40 - -
-
-
-
-
-30% - -
-
-
-
-
12 - -
-
-
-
-
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±10% of initial measured value
Less than specified maximum value
Less than specified maximum value
420~450
0.25
180
220
-
-
-
-
-
-
-
-
-
MECHANICAL CHARACTERISTICS:
1. Safety Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal
gas pressure is developed by circuit malfunction or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period
of 30 seconds.
PART NUMBER SYSTEM
NRLR 222 M 50V 20X25 S F
RoHS compliant
Lead Length (S=4mm, L=6mm)
Case Size (mm)
Voltage Rating
Tolerance Code
Capacitance Code
Series
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
®
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
Recommended PC Board Mounting Holes:
Sleeve Color: Dark Blue
∅= 2 ± 0.1
Insulation Sleeve and Minus
Polarity Marking
Can Top Safety Vent
D+1
Max.
L±2
(-)
(+)
10
4.0 ± 1
or
6.3 ± 1
Chassis
PC Board
D∅ ± 0.5
10 ± .1
Approx.
3.0mm
MAXIMUM EXPANSION FOR
Notice for Mounting
SAFETY VENT
The space from the top of the can shall be more than (3mm) from chassis or
other construction materials so that safety vent has room to expand in case
of emergency.
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
150