NRLPW_14 Datasheet, PDF (1/10 Pages) NIC-Components Corp. – Large Can Aluminum Electrolytic Capacitors

Large Can Aluminum Electrolytic Capacitors
NRLPW Series
FEATURES
• LONG LIFE AT +105°C (3,000 HOURS)
• HIGH RIPPLE CURRENT
• HIGH VOLTAGE (UP TO 500VDC)
• SUITABLE FOR SWITCHING POWER SUPPLIES
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
SPECIFICATIONS
Operating Temperature Range
-40 ~ +105°C
-25 ~ +105°C
Rated Voltage Range
50 ~ 100Vdc
160 ~ 500Vdc
Rated Capacitance Range
680 ~ 15,000μF
39 ~ 2,700μF
Capacitance Tolerance
±20% (M)
Max. Leakage Current (μA)
After 5 minutes (20°C)
3 x C(μF)V
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc)
Tan δ max.
50 63 80 100 160 180 200 220 250 400 420 450 500
0.35 0.3 0.25 0.25 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.25
Surge Voltage
W.V. (Vdc)
S.V. (Vdc)
50 63 80 100 160 180 200 220 250 400 420 450 500
63 79 100 125 200 225 250 270 300 450 470 500 550
Frequency (Hz)
60
120
500
1K
10K
Ripple Current
Correction Factors
50 ~ 100Vdc 0.90
1.00
1.05
1.10
1.15
Multiplier
at 85°C
160 ~ 250Vdc
0.80
1.00
1.20
1.30
1.50
400 ~ 500Vdc 0.80
1.00
1.20
1.25
1.40
Temperature
+65°C
+85°C
+105°C
Multipier
2.1
1.7
1.0
Rated Voltage (VDC)
Z (-25°C)/Z (+20°C)
Z (-25°C)/Z (+20°C)
Impedance Ration
(Low Temperature Stability)
50 ~ 100
160 ~ 250
400 ~ 450
3 max.
4 max.
8 max.
12 max.
-
-
500
12 max.
-
Load Life Test
50V~100V 2,000 hours at +105°C
Capacitance Change
Tan δ
Within ±20% of initial measured value
Less than 200% of specified maximum value
160V~500V 3,000 hours at +105°C
Leakage Current
Less than specified maximum value
Shelf Life Test
1,000 hours at +105°C
Capacitance Change
Tan δ
Within ±20% of initial measured value
Less than 200% of specified maximum value
(no load)
Leakage Current
Less than specified maximum value
Surge Voltage Test
1000 Cycles of 30 seconds "On" and
Capacitance Change
Tan δ
Within ±15% of initial measured value
Less than specified maximum value
5.5 minutes "Off" at 25°C
Leakage Current
Less than specified maximum value
Soldering Effect
Refer to
Capacitance Change
Tan δ
Within ±10% of initial measured value
Less than specified maximum value
JISC5102.8.5
Leakage Current
Less than specified maximum value
MECHANICAL CHARACTERISTICS:
1. Safety Vent:
The capacitors are provided with a pressure vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure is
developed by circuit malfunction or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period
of 30 seconds.
PART NUMBER SYSTEM
NRLPW 682 M 63V 30X35 S F
RoHS compliant
Lead Length
S=4mm (3.5mm φ35mm Dia.)
L = 6.0mm (special order)
Case Size (mm)
Voltage Rating
Tolerance Code
Capacitance Code
Series
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on
pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process
details with NIC’s technical support personnel: [e-mail]
Recommended PC Board Mounting Holes:
Sleeve Color: Dark Blue
PET Sleeve and Minus
Polarity Marking
Can Top Safety Vent
D+1
Max.
(-)
(+)
∅= 2 ± 0.1
Chassis
D∅ ± 0.5
10 ± .1
Approx.
3.0mm
10
L±2
4.0 ± 0.5
(3.5mm ± 0.5mm on φ35mm Dia.)
PC Board
or
6.0 ± 0.5 (Special Order)
MAXIMUM EXPANSION FOR
Notice for Mounting
SAFETY VENT
The space from the top of the can shall be more than (3mm) from chassis or
other construction materials so that safety vent has room to expand in case
of emergency.
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
1