NRLF_14 Datasheet, PDF (1/2 Pages) NIC-Components Corp. – Large Can Aluminum Electrolytic Capacitors

Large Can Aluminum Electrolytic Capacitors
FEATURES
• LOW PROFILE (20mm HEIGHT)
• LOW DISSIPATION FACTOR AND LOW ESR
• HIGH RIPPLE CURRENT
• WIDE CV SELECTION
• SUITABLE FOR SWITCHING POWER SUPPLIES
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
NRLF Series
SPECIFICATIONS
Operating Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Max. Leakage Current (μA)
After 5 minutes (20°C)
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc)
16
Tan δ max.
0.50
W.V. (Vdc)
16
Surge Voltage
S.V. (Vdc)
20
W.V. (Vdc)
180
S.V. (Vdc)
220
Ripple Current
Correction Factors
Frequency (Hz)
50
Multiplier at 16 ~ 100Vdc 0.93
85°C
160 ~ 450Vdc 0.75
Low Temperature
Stability (16 to 250Vdc)
Temperature (°C)
0
Capacitance Change
-5%
Impedance Ratio
1.5
Load Life Test
2,000 hours at +85°C
Capacitance Change
Tan δ
Leakage Current
Shelf Life Test
1,000 hours at +85°C
(no load)
Capacitance Change
Tan δ
Leakage Current
Surge Voltage Test
Per JIS-C-5141 (table #6, #4)
Surge voltage applied: 30 seconds
"On" and 5.5 minutes no voltage "Off"
Capacitance Change
Tan δ
Leakage Current
Soldering Effect
Refer to
MIL-STD-202F Method 210A
Capacitance Change
Tan δ
Leakage Current
-40 ~ +85°C
16 ~ 250Vdc
100 ~ 15,000μF
±20% (M)
-25 ~ +85°C
350 ~ 450Vdc
33 ~ 150μF
3 x C(μF)V
25 35 50 63 80
100 160~450
0.40 0.35 0.30 0.25 0.20 0.20
0.15
25 35 50 63 80
100
160
32 44 63 79 100
125
200
200 250 350 400 450
-
-
250 300 400 450 500
-
-
60 100 120 500 1K 10K ~ 50K -
0.95 0.99 1.00 1.05 1.08 1.15
-
0.80 0.95 1.0 1.20 1.25 1.40
-25 -40 - -
-
-
-
-10 -30% - -
-
-
-
3
9- -
-
-
-
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±10% of initial measured value
Less than specified maximum value
Less than specified maximum value
MECHANICAL CHARACTERISTICS:
1. Safety Vent:: The capacitors are provided with a pressure sensitive safety vent on the top. The vent is designed to
rupture in the event that high internal gas pressure is developed by circuit malfunction or mis-use like reverse voltage.
2. Terminal Strength: Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or
a radial bent force of 2.5Kg for a period of 30 seconds.
Sleeve Color: Dark
Blue
Can Top Safety Vent
D+1
Max.
L±2
Sleeve and Minus
Polarity Marking
PC Board Mounting Holes:
Notice for Mounting
The space from the top of the can shall be more than (3mm)
from chassis or other construction materials so that safety
vent has room to expand in case of emergency.
0.8
(-)
(+)
10
6.3 ± 1
∅= 2 ± 0.1
D∅ ± 0.5
10 ± .1
PC Board
MAXIMUM EXPANSION
FOR SAFETY VENT
Approx.
3.0mm
(4.0mm Leads Available As Option)
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on
pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process
details with NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
1