NRLFW Datasheet, PDF (1/2 Pages) NIC-Components Corp. – Large Can Aluminum Electrolytic Capacitors

Large Can Aluminum Electrolytic Capacitors
NRLFW Series
FEATURES
• LOW PROFILE (20mm HEIGHT)
• EXTENDED TEMPERATURE RATING +105^°C
• LOW DISSIPATION FACTOR AND LOW ESR
• HIGH RIPPLE CURRENT
• WIDE CV SELECTION
• SUITABLE FOR SWITCHING POWER SUPPLIES
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
SPECIFICATIONS
Operating Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Max. Leakage Current (µA)
After 5 minutes (20°C)
Max. Tan δ
at 120Hz/20°C
W.V. (Vdc)
Tan δ max.
W.V. (Vdc)
Surge Voltage
S.V. (Vdc)
W.V. (Vdc)
S.V. (Vdc)
Ripple Current
Correction Factors
Frequency (Hz)
Multiplier at 16 ~ 100Vdc
105°C
160 ~ 400Vdc
Low Temperature
Stability (16 to 250Vdc)
Temperature (°C)
Capacitance Change
Impedance Ratio
Load Life Test
2,000 hours at +105°C
Capacitance Change
Tan δ
Leakage Current
Shelf Life Test
1,000 hours at +105°C
(no load)
Capacitance Change
Tan δ
Leakage Current
Surge Voltage Test
Per JIS-C-5141 (table #6, #4)
Surge voltage applied: 30 seconds
"On" and 5.5 minutes no voltage "Off"
Capacitance Change
Tan δ
Leakage Current
Soldering Effect
Refer to
MIL-STD-202F Method 210A
Capacitance Change
Tan δ
Leakage Current
-40 ~ +105°C
16 ~ 250Vdc
68 ~ 10,000µF
±20% (M)
-25 ~ +105°C
400Vdc
33 ~ 100µF
3 x C(µF)V
16 25 35 50 63 80 100 ~ 400
0.45 0.35 0.30 0.25 0.20 0.17 0.15
16 25 35 50 63 80
100
20 32 44 63 79 100
125
160 200 250 400 400 -
-
220 250 300 400 450 -
-
50 60 100 120 500 1K 10K ~ 50K
0.93 0.95 0.99 1.00 1.05 1.08 1.15
0.75 0.80 0.95 1.00 1.20 1.25 1.40
0
-25 -40 -
-
-
-
-5% -10 -30% - -
-
-
1.5
3
9- -
-
-
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Within ±10% of initial measured value
Less than specified maximum value
Less than specified maximum value
MECHANICAL CHARACTERISTICS:
*NON-STANDARD VOLTAGES FOR THIS SERIES
1. Pressure Vent:
The capacitors are provided with a pressure sensitive safety vent on the top of can. The vent is designed to rupture in the event that high internal gas pressure
is developed by circuit malfunction or mis-use like reverse voltage.
2. Terminal Strength:
Each terminal of the capacitor shall withstand an axial pull force of 4.5Kg for a period 10 seconds or a radial bent force of 2.5Kg for a period of 30 seconds.
Minus Polarity Marking
Insulation Sleeve
10.0
10.0 ± 0.1
Max. 2.0
pcb hole spacing
Terminal
(t=0.8)
Sleeve Color:
Dark Blue
Can Top Vent ^{L ± 2.0 Max.}
∅d ± 1.0
6.3 ± 1.0
(4.0mm Leads Available As Option)
(∅D)
1.5
Top of Spin
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
®
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com
www.SMTmagnetics.com
165