NRESN_14 Datasheet, PDF (1/2 Pages) NIC-Components Corp. – Non-Polar Aluminum Electrolytic Capacitors

Non-Polar Aluminum Electrolytic Capacitors NRE-SN Series
LOW PROFILE, SUB-MINIATURE, RADIAL LEADS,
NON-POLAR ALUMINUM ELECTROLYTIC
FEATURES
• BI-POLAR
• 7mm HEIGHT / LOW PROFILE
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
CHARACTERISTICS
Rated Voltage Range
6.3 ~ 50Vdc
Capacitance Range
1.0 ~ 47μF
Operating Temperature Range
-40 ~ +85°C
Capacitance Tolerance
±20%(M)
Max. Leakage Current
After 1 minutes At +20°C
0.05CV or 10μA whichever is greater
Surge Voltage &
Max. Tan δ @ 120Hz/+20°C
W.V. (Vdc)
S.V. (Vdc)
Tan δ
6.3
10
16
25
35
50
8
13
20
32
44
63
0.24 0.20 0.16 0.16 0.14 0.12
Low Temperature Stability
Z-25°C/Z+20°C
4
3
2
2
2
2
(Impedance Ratio @ 120Hz)
Z-40°C/Z+20°C
8
6
4
4
3
3
Load Life Test at Rated W.V.
+85°C 1,000 Hours (Polarity Shall Be
Reversed Every 250 Hours
Capacitance Change
Tan δ
Leakage Current
Within ±25% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
STANDARD PRODUCTS AND CASE SIZE TABLE Dφ x L (mm) LEAD SPACING AND DIAMETER (mm)
Cap. (μF) Code
6.3
Working Voltage (Vdc)
10
16
25
35
50
1.0
1R0
-
-
-
-
-
4x7
Case Dia. (Dφ) 4 5 6.3
Lead Dia. (dφ) 0.45 0.45 0.45
Lead Space (F) 1.5 2.0 2.5
2.2
2R2
-
-
-
-
4x7 5x7
3.3
3R3
-
-
-
4x7 5x7 5x7
4.7
4R7
-
-
-
4x7 5x7 6.3x7
10
100
-
4x7 4x7 5x7 6.3x7 -
DIMENSIONS (mm)
22
220 5x7 5x7 6.3x7 6.3x7 -
-
33
330 5x7 6.3x7 6.3x7 -
-
-
Sleeve
dφ ± 0.05
47
470 6.3x7 6.3x7 6.3x7 -
-
-
F ± 0.5
L + β max.
15mm Min.
4mm
Min.
Dφ ± α
Drawing is representative of parts as supplied in bulk or
straight lead format, please see taping specification for details
on taped format packaging.
PART NUMBER SYSTEM
NRE-SN 3R3 M 50V 5X7 TB F..............
RoHS Compliant
TB = Tape & Box*
Case Size (Dφ x L)
Working Voltage (Vdc)
Tolerance Code (M=20%)
Capacitance Code: First 2 characters
significant, third character is multiplier
Series
*see taping specifications for details
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on
pages T10 & T11 of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process
details with NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
1