NRE-WB Datasheet, PDF (1/1 Pages) NIC-Components Corp. – Miniature Aluminum Electrolytic Capacitors

Miniature Aluminum Electrolytic Capacitors
NRE-WB Series
NRE-WB SERIES HIGH VOLTAGE, RADIAL LEADS, EXTENDED TEMPERATURE
FEATURES
RoHS
• HIGH VOLTAGE (UP THROUGH 450VDC)
• NEW REDUCED SIZES
Compliant
• +105^OC EXTENDED TEMPERATURE AND LOAD LIFE includes all homogeneous materials
CHARACTERISTICS
Rated Voltage Range
Capacitance Range
Operating Temperature Range
Capacitance Tolerance
200 ~ 450VDC
10 ~ 220µF
-25°C ~ +105°C
±20% (M)
*See Part Number System for Details
Maximum Leakage Current @ 20°C
Max. Tan δ @ 120Hz/20°C
Low Temperature Stability
Impedance Ratio @ 120Hz
Load Life Test at Rated W.V.
+105°C 8,000 Hours: 10φ
+105°C 10,000 Hours: 12.5φ & up
W.V.
S.V.
Tan δ
0.03CV +10µA after 2 minutes
200
250 350 400
450
250
300 400 450
500
0.15 0.15 0.20 0.24 0.24
Z-25°C/Z+20°C
3
3
4
6
6
Capacitance Change
Tan δ
Leakage Current
Within ±20% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Shelf Life Test
+105°C 1,000 Hours with no load
Shall meet same requirements as in load life test
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(mA rms AT 100KHz AND 105^OC)
Cap. (µF)
200
Working Voltage (Vdc)
250 350 400
450
10
-
-
-
300 350
22
600 560 -
- 680
33
650 710
-
900 850
68
- 1000 -
-
-
82
-
- 1100 -
-
220 2000 -
-
-
-
MAXIMUM ESR
(Ω AT 100KHz AND 20^OC)
Cap. (µF)
10
22
33
68
82
220
Working Voltage (Vdc)
200 250 350 400 450
-
-
- 39.81 39.81
11.31 11.31 -
- 18.09
7.54 7.54 - 12.06 12.06
- 3.66 -
-
-
-
- 4.05 -
-
1.13 -
-
-
-
RIPPLE CURRENT FREQUECY
CORRECTION FACTOR
Cap. Value ₅₀
Frequency (Hz)
120 1K 10K
<100µF 0.30 0.40 0.70 0.90
>100µF 0.35 0.45 0.75 0.90
100K
1.0
1.0
STANDARD PRODUCT AND CASE SIZE D φ x L (mm)
Cap. (µF) Code ₂₀₀
Working Voltage (Vdc)
250
350
400
10
100
-
-
-
10x20
22
220 10x20 10x20
-
-
33
330 10x20 12.5x20 -
16x20
68
680
-
16x20
-
-
82
820
-
-
18x25
-
220 221 18x31.5 -
-
-
450
12.5x20
16x20
18x25
-
-
-
PART NUMBERING SYSTEM
NREWB 100 M 400V 10X20 F .
Series
RoHS Compliant
Case Size (Dφ x L)
Working Voltage (Vdc)
Tolerance Code (M=20%)
Capacitance Code: First 2 characters
significant, third character is multiplier
LEAD SPACING AND DIAMETER (mm)
Case Dia. (Dφ) 10 12.5 16 18
Lead Dia. (dφ) 0.6 0.6 0.8 0.8
Lead Spacing (F) 5.0 5.0 7.5 7.5
Dim α
0.5 0.5 0.5 0.5
β = L < 20mm = 1.5mm, L > 20mm = 2.0mm
Polarity Marking ^{Insulation Sleeve}
dφ ± 0.05
F ± 0.5
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
®
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
L + β max.
15mm Min.
4mm
Min.
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com
Dφ ± α
www.SMTmagnetics.com
81