NRE-HW Datasheet, PDF (1/1 Pages) NIC-Components Corp. – Miniature Aluminum Electrolytic Capacitors

Miniature Aluminum Electrolytic Capacitors
NRE-HW Series
HIGH VOLTAGE, RADIAL, POLARIZED, EXTENDED TEMPERATURE
FEATURES
• HIGH VOLTAGE/TEMPERATURE (UP TO 450VDC/+105°C)
RoHS
• NEW REDUCED SIZES
CHARACTERISTICS
Rated Voltage Range
Capacitance Range
160 ~ 450VDC
0.47 ~ 330µF
Compliant
includes all homogeneous materials
*See Part Number System for Details
Operating Temperature Range
-40°C ~ +105°C (160 ~ 400V)
or -25°C ~ +105°C (450V)
Capacitance Tolerance
±20% (M)
Maximum Leakage Current @ 20°C
CV ≤ 1000µF 0.03CV +15µA, CV > 1000µF 0.02 +25µA (after 2 minutes)
W.V.
160
200 250 350
400 450
Max. Tan δ @ 120Hz/20°C
S.V.
200
250 300 400
450 500
Tan δ
0.20 0.20 0.20 0.25 0.25 0.25
Low Temperature Stability
Impedance Ratio @ 120Hz
Z-25°C/Z+20°C
Z-40°C/Z+20°C
3
3
3
4
6
6
6
6
6
8
10
-
Load Life Test at Rated W.V.
+105°C 2,000 Hours: 10φ & Up
+105°C 1,000 Hours: 8φ
Capacitance Change
Tan δ
Leakage Current
Within ±25% of initial measured value
Less than 200% of specified maximum value
Less than specified maximum value
Shelf Life Test
+85°C 1,000 Hours with no load
Shall meet same requirements as in load life test
E.S.R.
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(Ω AT 120Hz AND 20^oC) _{(mA rms AT 120Hz AND 105}^O_C)
Cap
W.V. (Vdc)
(µF) 160~250 350~450
Cap
Working Voltage (Vdc)
PART NUMBER SYSTEM
(µF) 160 200 250 350 400 450 NREHW 100 M 350V 10X20 F...
0.47 706
882
1.0 332
415
2.2 151
188
3.3 101
126
4.7 70.6
86.2
10 33.2
41.5
22 15.1
18.8
0.47 7 8 8 10 10 -
1.0 15 16 18 20 20 18
2.2 22 24 25 28 28 28
3.3 28 32 34 36 36 36
4.7 39 40 41 47 47 47
10 63 64 66 70 70 70
22 107 112 119 123 126 125
Series
RoHS Compliant
Case Size (Dφ x L)
Working Voltage (Vdc)
Tolerance Code (M=20%)
Capacitance Code: First 2 characters
significant, third character is multiplier
33 10.1
12.6
47 7.06
8.82
68 4.88
6.10
33
47
137 147 154 158 161 154
172 175 182 182 189 172
RIPPLE CURRENT FREQUENCY
68 217 228 235 242 249 189 ^{CORRECTION FACTOR}
100 3.32
4.15
150 2.21
-
100 287 301 302 308 - -
150 385 403 412 - - -
Cap. Value
Frequency (Hz)
100 ~ 500 1K ~ 5K 10K ~ 100K
220 1.51
-
220 522 532 - - - -
<100µF
1.00
1.30
1.50
330 1.01
-
330 560 - - - - -
100 ~ 1000µF
1.00
1.20
1.30
STANDARD PRODUCT AND CASE SIZE D φ x L (mm)
Cap
(µF)
Code
160
Working Voltage (Vdc)
200
250
350
400
450
0.47 R47 5x11 5x11 5x11 6.3x11 6.3x11
-
1.0 1R0 5x11 5x11 5x11 6.3x11 8x11.5 8x12.5
2.2 2R2 6.3x11 6.3x11 6.3x11 8x11.5 8x11.5 10x16
3.3 3R3 6.3x11 6.3x11 8x11.5 8x12.5 10x12.5 10x20
4.7 4R7 6.3x11 8x11.5 8x11.5 10x12.5 10x16 12.5x20
10 100 8x11.5 8x12.5 10x12.5 10x20 10x20 12.5x25
22 220 10x12.5 10x16 10x20 12.5x25 12.5x25 16x25
33 330 10x20 10x20 12.5x20 16x25 16x25 16x31
47 470 12.5x20 12.5x20 12.5x25 16x31 16x31 18x36
68 680 12.5x20 12.5x25 16x25 16x36 18x36 18x41
100 101 12.5x25 16x25 16x36 18x41
-
-
150 151 16x31 16x36 18x36
-
-
-
220 221 16x36 18x36
-
-
-
-
330 331 18x41
-
-
-
-
-
®
LEAD SPACING AND DIAMETER (mm)
Case Dia. (Dφ) 5 6.3 8 10 12.5 16 18
Lead Dia. (dφ) 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead Spacing (F) 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Dim α
0.5 0.5 0.5 0.5 0.5 0.5 0.5
β = L < 20mm = 1.5mm, L > 20mm = 2.0mm
Polarity Marking ^{Insulation Sleeve}
dφ ± 0.05
F ± 0.5
L + β max.
15mm Min.
4mm
Min.
Dφ ± α
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
73