NRD4004TR-5KF Datasheet, PDF (1/2 Pages) NIC-Components Corp. – Surface Mount Silicon Rectifi er Diode

Surface Mount Silicon Rectifier Diode
NRD Series
FEATURES
• VOLTAGE: 50 TO 1000 VOLTS, CURRENT; 1.0 AMPERE
• CORRESPONDS TO 1N4001 THRU 1N4007 IN SURFACE MOUNT PACKAGE
• FLAT PACK - LOW PROFILE, FOR SURFACE MOUNT APPLICATIONS
• GLASS PASSIVATED CHIP CONSTRUCTION
• HIGH TEMPERATURE SOLDERING (250^OC/10 SECONDS)
• EASY PICK AND PLACE
RoHS
Compliant
includes all homogeneous materials
CATHODE
*See Part Number System for Details
1.25~1.45
2.54~2.79
3.99~4.50
4.93~5.28
.8~1.3
1.98~2.29
0.76~1.27 _0.1~0.2
DIMENSIONS (mm)
MECHANICAL DATA:
SIZE: SMA/DO-214AC
CASE: Molded epoxy
TERMINALS: Solder plated Copper alloy
POLARITY: Indicated by cathode band
STANDARD PACKAGING: 12mm tape (EIA-RS-481)
WEIGHT: 0.064 gram
PART NUMBERING SYSTEM
NRD 4004 TR -5K F
RoHS Compliant
Reel qty: (5K & 7.5K)
Tape and Reel
Voltage designator (See table below)
Series
MAXIMUM RATINGS (At TA=25⁰C unless otherwise noted)
Ratings
Symbol NRD4001 NRD4002 NRD4003 NRD4004 NRD4005 NRD4007
Maximum Recurrent Peak Reverse voltage
VRRM
50
100
200
400
600
1000
Maximum RMS voltage
VRMS
35
70
140
280
420
700
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
1000
Maximum Average Forward Rectified Current TA=75°C
Io
1.0
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load (JEDEC method)
IFSM
30
UNITS
Volts
Volts
Volts
Amps
Amps
ELECTRICAL CHARACTERISTICS (At TA=25⁰C unless otherwise noted)
Characteristics
Symbol NRD4001 NRD4002 NRD4003 NRD4004 NRD4005 NRD4007
Maximum Forward Voltage at 1.0A DC
VF
1.1
Maximum Full Load Reverse Current
Full Cycle Average @TA=75°C
30
Maximum DC Reverse Current at
@TA=25°C
IR
5.0
Rated DC Blocking Voltage
@TA=125°C
50
Maximum Thermal Resistance (Note 1)
RqJL
30
Typical Junction Capacitance (Note 2)
CJ
15
Operating and Storage Temperature Range
TJ, TSTG
-60 ~ +150°C
UNITS
Amps
µAmps
µAmps
µAmps
°C/W
pF
°C
Maximum Reverse Recovery Time (Note 3)
t_rr
2.5
µS
NOTES:
1. Thermal resistance junction to terminal, 5mm² (0.013 mm Thick) copper land patterns.
2. Measured at 1.0 MHz and applied average voltage of 4.0VDC.
3. Reverse recovery test conditions: If=0.5A, IR=1.0A, t_rr=0.25A
®
NIC COMPONENTS
www.niccomp.com
www.lowESR.com
www.RFpassives.com ₁