NRCW Datasheet, PDF (1/6 Pages) NIC-Components Corp. – Thick Film Chip Resistors

Thick Film Chip Resistors
NRCW Series
FEATURES
• EIA STANDARD SIZING 0603 (1/8W), 0805 (1/4W), 1206 (1/2W), 2010 (1W) AND
2512 (2W)
• VOLTAGE RATINGS (50VDC ~ 300VDC)
• RESISTANCE VALUES (0Ω TO 1MΩ)
• THICK FILM ON ALUMINA SUBSTRATE, RuO2/Ag RESISTIVE LAYER
• GLASS AND EPOXY OVERCOAT
NEW
High Power
Resistors
(Up to 2Watt)
Type
EIA
Size
NRCW06 0603
NRCW10 0805
NRCW12 1206
NRCW50 2010
NRCW100 2512
Power Rating
at 70°C
1/8W
(0.125W)
1/4W
(0.25W)
1/2W
(0.50W)
Max.*1
Working
Voltage
50V
150V
200V
Max.*2
Overload
Voltage
100V
300V
400V
1W
200V 400V
2W
300V 500V
Resistance
Tolerance
(Code)
±1% (F)
±5% (J)
±1% (F)
±5% (J)
±1% (F)
±5% (J)
±1% (F)
±5% (J)
±1% (F)
±5% (J)
Temperature
Coefficient (ppm/°C)
+20°C ~ +155°C
±100
±100
±100
±100
±100
Resistance
Range
(Ω)
1.0 ~ 1M
1.0 ~ 1M
1.0 ~ 1M
1.0 ~ 1M
1.0 ~ 1M
Resistance
Value
Operating
Temperature
Range (°C)
E-24,E-96
E-24,E-96
E-24,E-96 -55 ~ +155
E-24,E-96
E-24,E-96
Note *1 - Maximum allowable continuous Working Voltage
for all resistors is the lower of the two values:
“Maximum Working Voltage” as specified above
(or)
Power rating (Watts) x Resistance (Ohms)
Power Derating Curve: For operation above 70^°C,
power rating must be derated according to the following chart:
100
80
60
Note *2 - Maximum allowable Overload voltage is two times the
Maximum Working Voltage (see Note *1 above).
40
20
0
-20
20
60
100
70
140 160 ^oC
155
ZERO OHM PART NUMBERS AND SPECIFICATIONS
Part Numbers*
EIA Rated Current
Size
(A)
Peak Current
(A)
Max. Resistance
(mΩ)
NRCW06ZOTRF 0603
2.0
5.0
20
NRCW10ZOTRF 0805
4.0
10
20
NRCW12ZOTRF 1206
5.0
12.5
20
NRCW50ZOTRF 2010
7.0
17.5
20
NRCW100ZOTRF 2512
10
25
20
* See page 5 for optional reel sizes/quantities on 0603 and 0805 case sizes.
Operating
Temperature
Range (°C)
-55 ~ +155
PART NUMBER SYSTEM (5% Tol. E-24 VALUES)
PART NUMBER SYSTEM (1% Tol. E-24 & E96 VALUES)
NRCW 10 J 103 TR 10 F
NRCW 10 F 1002 TR 10 F
RoHS compliant
RoHS compliant
Opt. Reel Qty 10=10K (see page 6)
Opt. Reel Qty 10=10K (see page 6)
Tape & Reel Packaging
Tape & Reel Packaging
Resistance Code: First 2 figures are significant,
Resistance Code: First 3 figures are significant,
3rd digit is the multiplier
4th digit is the multiplier
Tolerance Code: J = 5%
Tolerance Code: F = 1%
Size Code
Size Code
Series
Series
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com ₁
SPECIFICATIONS ARE SUBJECT TO CHANGE