NRCL Datasheet, PDF (1/4 Pages) NIC-Components Corp. – Pb-Free Thick Film Chip Resistors

Pb-Free Thick Film Chip Resistors
NRCL Series
FEATURES
• LEAD (Pb)-FREE CONSTRUCTION
• COMPLIES WITH RoHS DIRECTIVE 2002/95/EC WITHOUT EXEMPTIONS
• EIA STANDARD SIZING 0201 (1/20W), 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206
(1/4W) AND 1210 (1/3W)
• THICK FILM CONSTRUCTION USING HIGH PURITY ALUMINA SUBSTRATE WITH
PB-FREE RESISTIVE PASTE COVERED WITH PROTECTIVE OVERCOAT
• HIGH TEMPERATURE (+260°C) REFLOW SOLDERING COMPATIBLE
• AVAILABLE IN ZERO OHM (JUMPER)
RoHS Compliant
Pb Free
(<100ppm)
Type
NRCL02
NRCL04
NRCL06
NRCL10
NRCL12
NRCL25
NRCL02ZO
NRCL04ZO
NRCL06ZO
NRCL10ZO
NRCL12ZO
NRCL25ZO
EIA
Size
Power Rating
at 70°C
Max.*1
Working
Voltage
Max.*2
Overload
Voltage
Resistance
Tolerance
(Code)
Temperature
Coefficient
(ppm/°C)
Resistance
Range
(Ω)
Resistance
Value
Operating
Temperature
Range (°C)
±200
100 ~ 1M
±1% (F) +800/-100
1.0 ~ 9.76
E-24,E-96
0201 1/20 (0.05) W 25V
50V
+600/-0
±200
10 ~ 97.6
100 ~ 10M
-55 ~ +125
±5% (J) +800/-100
1.0 ~ 9.1
E-24
+600/-0
10 ~ 91
±1% (F)
±200
10 ~ 1M
E-24,E-96
0402 1/16 (0.063) W 50V
100V
±5% (J)
+500/-300
±200
1.0 ~ 9.1
10 ~ 1M
E-24
±300
1.1M ~ 10M
±1% (F)
±100
10 ~ 1M
E-24,E-96
0603 1/10 (0.10) W 50V
100V
±5% (J)
+500/-300
±200
1.0 ~ 9.1
10 ~ 10M
E-24
0805 1/8 (0.125) W 150V
300V
±1% (F)
±5% (J)
±100
+500/-300
±200
10 ~ 1M
1.0 ~ 9.1
10 ~ 1M
E-24,E-96 _{-55 ~ +155}
E-24
±1% (F)
±100
10 ~ 10M
E-24,E-96
1206 1/4 (0.25) W 200V
400V
±5% (J)
+500/-300
±200
1.0 ~ 9.1
10 ~ 10M
E-24
±1% (F)
±100
10 ~ 1M
E-24,E-96
1210 1/3 (0.33) W 200V
400V
±5% (J)
+500/-300
±200
1.0 ~ 9.1
10 ~ 10M
E-24
0201
Rated Current 1.0A (0.05Ω max. DC Resistance)
-55 ~ +125
0402
Rated Current 1.0A (0.05Ω max. DC Resistance)
0603
0805
Zero Ohm Jumper
Rated Current 1.0A (0.05Ω max. DC Resistance)
Rated Current 1.5A (0.05Ω max. DC Resistance)
-55 ~ +155
1206
Rated Current 2.0A (0.05Ω max. DC Resistance)
1210
Rated Current 2.5A (0.05Ω max. DC Resistance)
Note *1 - Maximum allowable continuous Working Voltage
for all resistors is the lower of the two values:
“Maximum Working Voltage” as specified above
(or)
Power rating (Watts) x Resistance (Ohms)
Note *2 - Maximum allowable Overload voltage is 2.5 times the
Maximum Working Voltage (see Note *1 above).
Power Derating Curve: For operation above 70^°C,
power rating must be derated according to the following chart:
100
80
60
40
20
0
-20
20
60
100
140 160 ^oC
125 155
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com ₁
SPECIFICATIONS ARE SUBJECT TO CHANGE