NRCA Datasheet, PDF (1/5 Pages) NIC-Components Corp. – Thick Film Chip Resistors

Thick Film Chip Resistors
FEATURES
• EIA STANDARD SIZING 0402(1/16W), 0603(1/10W), 0805(1/8W), 1206(1/4W), 1210(1/2W), 2010(1/2W), 2512(1W)
• HIGH RELIABILITY AUTOMOTIVE GRADE AEC Q-200 QUALIFIED
• SULFUR RESISTANT (H2S 3PPM, 40°C, RH 90%, 1000 HOURS)
Automotive Grade
• BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
• AVAILABLE IN ZERO OHM (JUMPER)
Resistors
NRCA Series
Type
NRCA04
EIA
Size
Power Rating
at 70°C
Max.*1
Working
Voltage
Max.*2
Overload
Voltage
0402 1/16 (0.063) W 50V 100V
NRCA06 0603 1/10 (0.10) W 75V 150V
NRCA10 0805 1/8 (0.125) W 150V 300V
NRCA12 1206 1/4 (0.25) W 200V 400V
NRCA25 1210 1/2 (0.50) W 200V 400V
NRCA50 2010 1/2 (0.50) W 200V 400V
NRCA100 2512
NRCA04ZO
NRCA06ZO
NRCA10ZO
NRCA12ZO
NRCA25ZO
NRCA50ZO
NRCA100ZO
0402
0603
0805
1206
1210
2010
2512
1 (1.0) W 250V
Zero Ohm
500V
Resistance
Tolerance
(Code)
Temperature
Coefficient
(ppm/°C)
Resistance
Range
(Ω)
Resistance
Value
±1% (F),
±5% (J)
+400/-200
±100
±200
1.0 ~ 10
10.2 ~ 1M
1.02M ~ 10M
±1% (F),
±5% (J)
+400/-200
±100
±200
1.0 ~ 10
10.2 ~ 1M
1.02M ~ 10M
±1% (F),
±5% (J)
+400/-200
±100
±200
1.0 ~ 10
10.2 ~ 1M
1.02M ~ 10M
±1% (F),
±5% (J)
+400/-200
±100
±200
1.0 ~ 10
10.2 ~ 1M
1.02M ~ 10M
E-24,E-96
±1% (F),
±5% (J)
+400/-200
±100
±200
1.0 ~ 10
10.2 ~ 1M
1.02M ~ 10M
±1% (F),
±5% (J)
±200
±100
±200
1.0 ~ 9.96
10 ~ 1M
1.02M ~ 10M
±1% (F),
±5% (J)
±200
±100
±200
1.0 ~ 9.96
10 ~ 1M
1.02M ~ 10M
Rated Current 1.0A (0.05Ω max. DC Resistance)
Rated Current 1.0A (0.05Ω max. DC Resistance)
Rated Current 1.5A (0.05Ω max. DC Resistance)
Rated Current 2.0A (0.05Ω max. DC Resistance)
Rated Current 3.0A (0.05Ω max. DC Resistance)
Rated Current 3.2A (0.05Ω max. DC Resistance)
Rated Current 4.5A (0.05Ω max. DC Resistance)
Temperature
Range
-55°C ~ +155°C
Note *1 - Maximum allowable continuous Working Voltage
for all resistors is the lower of the two values:
“Maximum Working Voltage” as specified above
(or)
Power rating (Watts) x Resistance (Ohms)
Note *2 - Maximum allowable Overload voltage is two times the
Maximum Working Voltage (see Note *1 above).
Power Derating Curve: For operation above 70^°C,
power rating must be derated according to the following chart:
100
80
60
40
20
0
-20
20
60
100
140 160 ^oC
70
155
0402/0603/0805/1206/1210/2010/2512
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com ₁
SPECIFICATIONS ARE SUBJECT TO CHANGE