English
Language : 

NPIM-A Datasheet, PDF (1/11 Pages) NIC-Components Corp. – NPIM Shielded Power Inductors
NPIM Shielded Power Inductors
NPIM__A Series
FEATURES
• SHIELDED POWER INDUCTOR
• HIGH TEMPERATURE (+150°C)
• HIGH CURRENT AND LOW DCR
• LOW NOISE GAPLESS CONSTRUCTION
• AEC-Q200 QUALIFIED*
Designed for Automotive
Applicatiions
RoHS
Compliant
includes all homogeneous materials
CHARACTERISTICS (53 ~ 106)
*See Part Number System for Details
Case Code
63A
64A
75A
85A
105A
Inductance Range (μH)
0.68, 1.0
10
4.7 ~ 48
2.5 ~ 47
2.5 ~ 22
Operating Temperature Range
-40°C ~ +150°C (Including Self-Heating)
Inductance Tolerance
±20% (M)
Operating Voltage**
35Vop max.
**Please contact NIC for the operating voltage for individual items.
104AL
0.68, 1.0
Test Item
High Temperature Endurance
Test Method & Conditions
Temperature: 150°C ± 2°C (including self-heating)
Applied current: DC 1.0A
Duration: 2,000 hours
Specification
Heat Resistance
Temperature: 150°C ± 2°C
Duration: 2,000 hours
Damp Heat (Loaded)
Temperature/Humidity: 85°C ± 2°C/85%RH
Applied current: DC 1.0A
Duration: 2,000 hours
Inductance: Within ±10% of initial value
DC Resistance: Within ±5% of intial value
Moisture Resistance
Temperature/Humidity: 85°C ± 2°C/85%RH
Duration: 2,000 hours
Physical: Coils shall not have any abnormality in
appearance and construction.
Cold Resistance
Temperature: -40“C ± 2°C
Duration: 2,000 hours
Thermal Shock
Vibration Resisitance
Temperature: -40“C ± 2°C 10 min., 5 ~ 35°C 0 ~ 5min.,
150°C ± 2°C 10 min.
Duration: 2,000 cycles
Frequency: Log sweep 10 ~ 55 ~ 10Hz/1 min.
Amplitude: 1.5mm max in 3 directions (2 hours each) No disconnection of coils or mechanical damage.
Duration: 6 hours total
*NPIM_A series meets the testing requirements of AEC-Q200 Table 5, contact NIC for test data.
PART NUMBER SYSTEM
NPIM 75A 4R7 M TR Q Y F
RoHS Compliant
Q = AEC Q-200 Qualified
TR = Tape & Reel Packaging
Tolerance: M = 20%
Inductance Value Code: First two characters
are signficant figures, 3rd character is multiplier, "R" = decimal point
Size Code
Series
"Y" denotes suitable for automotive equipment, sourced to special
production and inspection at TS-16949 certified production site.
®
1
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS SUBJECT TO CHANGE