NMA Datasheet, PDF (1/12 Pages) C&D Technologies – Isolated 1W Dual Output DC-DC Converters

Automotive Grade Ceramic Chip Capacitors
NMA Series
FEATURES
• MANUFACTURED AT ISO/TS 16949 PRODUCTION FACILITY
• AEC-Q200 QUALIFIED
• SURFACE MOUNT CASE SIZES 0402, 0603, 0805 & 1206
• AVAILABLE IN NPO & X7R DIELECTRICS
• AVAILABLE WITH FLEX TERMINATIONS & OPEN MODE
CONSTRUCTION
CHARACTERISTICS
Type
Capacitance Range
Capacitance Tolerance
Operating Temperature Range
Temperature Characteristics
Rated Voltages
Q Factor
Dissipation Factor
Insulation Resistance @ 25°C
@ < Rated Voltage for 60 Sec.
Insulation Resistance @ 125°C
@ < Rated Voltage for 60 Sec.
Dielectric Withstanding Voltage
NPO
X7R
4.7pF ~ 0.01μF
220pF ~ 4.7μF
<5pF: C (±0.25pF), 5pF ~ <10pF: D (±0.5pF), >10pF: J (±5%)
±10% (K)
-55°C ~ +125°C
-55°C ~ +125°C
0±30 ppm/°C
±15%
50V & 100V
16V, 25V, 50V & 100V
Cap. <30pF: Q = 1,000 min.
Cap. >30pF: Q = 400 +20xC
-
-
3.5% max.
100,000MΩ or 1,000MΩ • μF
Whichever is less
10,000MΩ or 500MΩ • μF
Whichever is less
10,000MΩ or 100MΩ • μF
1,000MΩ or 10MΩ • μF
Whichever is less
Whichever is less
250% of rated voltage for 1~5 sec, 50mA current maximum
Test Conditions (EIA-198-2E)
<1000pF (1MHz±10%), 0.5~5Vrms
>1000pF (1KHz ±10%), 1.0Vrms ± 0.2Vrms
1KHz, 1.0V ±0.2Vrms
PART NUMBER SYSTEM
NMA -P 0805 X7R 105 K 25 E 3K 135 Q Y F
RoHS Compliant
Q = AEC-Q200 qualification
Component thickness in mm: 135 = 1.35mm, R90 = 0.90mm
Reel Quantity: 3K = 3,000 pieces
Packaging: C = 7" reel, paper carrier
D = 13" reel, paper carrier
E = 7" reel, embossed plastic carrier
F = 13" reel, embossed plastic carrier
Voltage (Vdc)
Capacitance Tolerance Code (see chart)
Capacitance Code, expressed in pF, first 2 digits are
significant, 3rd digit is no. of zeros, “R” indicates
decimal for under 10pF
Temperature Characteristic
Size Code (see chart)
Construction Type: No Code = Standard BME construction Ni/Cu/Ni-Sn)
P = Soft termination
S = Soft termination with Open Mode Construction
Series
"Y" denotes suitable for automotive equipment, sourced to special
production and inspection at TS-16949 certified production site
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
1
Specifications are subject to change