NEXT Datasheet, PDF (1/1 Pages) NIC-Components Corp. – Memory Back-Up Capacitors

Memory Back-Up Capacitors
NEXT Series
FEATURES
• SMALLER THAN NEXA SERIES
• DOUBLE LAYER CONSTRUCTION
• SHORT TERM POWER SOURCE (UP TO 50mA)
• SUITABLE FOR FLOW SOLDERING
• LEAD-FREE FINISH
CHARACTERISTICS
Rated Voltage Range
Rated Capacitance Range
Operating Temp. Range
Capacitance Tolerance
Load Life Test @ 85°C
1,000 hours
Temperature Cycling
(5 cycles, -40 ~ +85°C
Humidity Resistance
(240 hours @ 40°C/90% RH)
5.5VDC
0.1F ~ 5.6F (100,000μF ~ 5,600,000μF)
-40°C ~ +85°C
+80%/-20% (Z)
Δ Capacitance Change
Maximum ESR
Current at 30 minutes
Δ Capacitance Change
Maximum ESR
Current at 30 minutes
Δ Capacitance Change
Maximum ESR
Current at 30 minutes
Super Capacitor
Application Guide
Less than ±30% of initial measured value
Less than 200% of the specified maximum value
Less than 200% of the specified maximum value
Within +80%/-20% of specified value
Less than specified maximum value
Less than specified maximum value
Less than ±20% of initial measured value
Less than 120% of the specified maximum value
Less than 120% of the specified maximum value
STANDARD VALUES AND SPECIFICATIONS
NIC P/N
Capacitance Value (F) Rated Voltage
Charge Discharge
(VDC)
NEXT104Z5.5V11.5X8.5F
0.10
0.14
5.5
NEXT224Z5.5V14.5X12F
0.22
0.28
5.5
NEXT474Z5.5V16.5X13F
0.47
0.60
5.5
NEXT105Z5.5V21.5X13F
1.0
1.3
5.5
NEXT225Z5.5V28.5X14F
2.2
2.8
5.5
NEXT335Z5.5V36.5X15F
3.3
4.2
5.5
NEXT565Z5.5V44.5X17F
5.6
7.2
5.5
Max. Current @
30 minutes (mA)
< 0.15
<0.33
<0.71
<1.5
<3.3
<5.0
<8.4
Max. ESR @
1KHz (Ω)
<16
<10
<6.5
<3.5
<1.8
<1.0
<0.6
Typical DCR
(Ω)
23
16
5.4
2.9
2.1
1.3
0.8
CASE DIMENSIONS (mm)
NIC P/N
DIMENSIONS (mm)
DH
S
LL
d1 d2
NEXT104Z5.5V11.5X8.5F
11.5 8.5 5.08 4.1 ± 1.0 0.4 1.2
NEXT224Z5.5V14.5X12F
14.5 12.0 5.08 3.4 ± 1.0 0.4 1.2
NEXT474Z5.5V16.5X13F
16.5 13.0 5.08 5.1 ± 1.0 0.4 1.2
NEXT105Z5.5V21.5X13F
21.5 13.0 7.62 4.5 ± 1.5 0.6 1.2
NEXT225Z5.5V28.5X14F
28.5 14.0 10.16 8.0 ± 1.5 0.6 1.4
NEXT335Z5.5V36.5X15F
36.5 15.0 15.0 8.7 ± 2.0 0.6 1.7
NEXT565Z5.5V44.5X17F
44.5 17.0 20.0 7.5 ± 2.0 1.0 1.4
D ±0.5
H max.
S ±0.5
-
+
-
+
LL
0.3mm min.
TERMINATION FINISH:
Pb-FREE (99%Sn/1%Cu)
d2 ±0.1
d1 ±0.1
PRECAUTIONS
WASHING is NOT RECOMMENDED. Additional guidelines and precautions
can be found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
1