NACX Datasheet, PDF (1/2 Pages) NIC-Components Corp. – Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors NACX Series
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION
• VERY LOW IMPEDANCE AT 100KHz
• WIDE TEMPERATURE RANGE (-55 +105^OC)
• MAXIMUM 5.5mm HEIGHT
• ANTI-SOLVENT (2 MINUTES)
• DESIGNED FOR REFLOW SOLDERING
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
CHARACTERISTICS
Rated Voltage Range
Rated Capacitance Range
Operating Temperature Range
Capacitance Tolerance
Max. Leakage Current After 2 Minutes at 20°C
W.V. (Vdc)
Surge Voltage and Max. Tan δ
S.V.(Vdc)
Tan δ
Low Temperature Stability
(Impedance Ratio @ 120Hz)
Z-25°C/Z+20°C
Z-55°C/Z+20°C
High Temperature Load Life at ^{Capacitance Change}
105°C and Rated Working Voltage
Tan δ
1,000 hours
Leakage Current
6.3 ~ 63V
0.47 ~ 150µF
-55 ~ +105°C
±20% (M), ±10% (K)*
0.01CV or 3µA whichever is greater
6.3 10 16 25 35 50 63
8 13 20 32 44 63 79
0.24 0.20 0.16 0.14 0.12 0.12 0.12
3
2
2
2
2
2
2
5
4
4
3
3
3
3
Within ±25% of initial measured value
Less than 200% of specified value
Less than the specified value
* Optional ± 10% (K) Tolerance available on most values. Contact factory for availability.
MAXIMUM PERMISSIBLE RIPPLE CURRENT
(mA rms AT 100KHz AND 105^OC)
Cap.
Working Voltage (Vdc)
(µF) 6.3 10 16 25 35 50 63
0.47 -
-
-
- 51 30 15
1.0 -
-
-
- 68 37 20
2.2 -
-
-
- 68 45 24
3.3 -
-
-
- 68 52 40
4.7 -
-
- 68 68 75 40
10 -
- 68 105 105 120 65
22 68 105 105 155 155 -
-
33 105 105 155 155 -
-
-
47 105 155 155 155 -
-
-
100 155 155 155 -
-
-
-
220 155 -
-
-
-
-
-
MAXIMUM IMPEDANCE
(Ω AT 100KHz AND 20^OC)
Cap.
Working Voltage (Vdc)
(µF) 6.3 10 16 25 35 50 63
0.47 -
-
-
- 6.0 8.0 10
1.0 -
-
-
- 3.1 7.4 8.0
2.2 -
-
-
- 2.9 6.6 8.0
3.3 -
-
-
- 2.7 5.4 3.5
4.7 -
-
- 2.3 2.3 2.9 3.5
10 -
- 2.3 1.1 1.1 1.3 1.6
22 2.3 1.1 1.1 0.6 0.6 -
-
33 1.1 1.1 0.6 0.6 -
-
-
47 1.1 0.6 0.6 0.6 -
-
-
100 0.6 0.6 0.6 -
-
-
-
220 0.6 -
-
-
-
-
-
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
®
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com
www.SMTmagnetics.com
19