NACVF Datasheet, PDF (1/2 Pages) NIC-Components Corp. – Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors NACVF Series
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNT
RoHS
• HIGH VOLTAGE (160VDC AND 450VDC)
• 10mm x 14mm ~ 18mm x 22mm CASE SIZES
• LONG LIFE (5000 HOURS AT +105^OC)
• DESIGNED FOR REFLOW SOLDERING
Compliant
includes all homogeneous materials
*See Part Number System for Details
CHARACTERISTICS
Rated Voltage Range
Rated Capacitance Range
Operating Temperature Range
Capacitance Tolerance
Max. Leakage Current After 2 Minutes
Max. Tan δ at 120Hz & 20°C
Low Temperature Stability
(Impedance Ratio @ 120Hz)
Z -25°C/+20°C
Load Life @ 105°C & Rated Voltage
10x14mm 3,000 hours
10x18mm 4,000 hours
12.5 ~ 18mm Dia 5,000 hours
Capacitance Change
Tan δ
Leakage Current
Resistance to Soldering Heat
Within the Recommended
Reflow Conditions
Capacitance Change
Tan δ
Leakage Current
160Vdc
2
200Vdc
0.15
2
160 ~ 450Vdc
2.2 ~ 100µF
-40°C ~ +105°C
±20% (M)
0.06CV + 10µA
250Vdc 350Vdc
0.20
3
5
400Vdc
450Vdc
0.24
6
6
Within ±20% of initial measured value
Less than 200% of specificed value
Less than the specificed maximum value
Within ±10% of initial measured value
Less than the specificed maximum value
Less than the specificed maximum value
MAXIMUM RIPPLE CURRENT
(mA rms AT 100KHz AND 105°C)
��� �µ��
���
������� ������� �����
��� ��� ��� ��� ��� ���
�
�
�
�
� _��
���
�
�
�
�� �� ��
���
�
�
� �� �� ��
��
�� �� �� ��� ��� ���
��
� ��� ��� ��� ��� ���
��
��� ��� ��� ��� ��� �
��
��� ��� ��� ��� �
�
��
��� ��� ��� �
�
�
���
���� ���� �
�
�
�
MAXIMUM ESR
(Ω AT 120Hz AND 20°C)
��� �µ��
���
������� ������� �����
��� ��� ��� ��� ��� ���
�
�
�
�
� _{���}
���
�
�
� _{��� ��� ���}
���
�
�
� _{���� ���� ����}
��
���� ���� ���� ���� ���� ����
��
� _{���� ���� ���� ���� ����}
��
���� ���� ���� ���� ���� �
��
���� ���� ���� ���� �
�
��
���� ���� ���� ^�
�
�
���
���� ���� ^�
�
�
�
RIPPLE CURRENT FREQUENCY CORRECTION FACTORS
Voltage
(Vdc)
Frequecy (Hz)
120 1K 10K ~ 30K 31K ~ 100K
160V ~ 250V 0.55 0.85
0.90
1.00
350V ~ 450V 0.50 080
0.90
1.00
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
®
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [e-mail]
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
17