PXIE-PCIE8371 Datasheet, PDF (4/5 Pages) National Instruments Corporation – PCI Express control of PXI Express/CompactPCI Express

PCI Express Control of PXI Express (MXI-Express x4 for PXI Express)
Storage Environment
Ambient temperature range .................................................. -40 to 71 °C (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2;
meets MIL-PRF-28800F Class 3 limits)
Relative humidity range......................................................... 5 to 95%, noncondensing (tested in accordance with IEC-60068-2-56)
Shock
Operating shock ..................................................................... 30 g peak, half-sine, 11 ms pulse (tested in accordance with IEC-60068-2-27;
meets MIL-PRF-28800F Class 2 limits)
Vibration
Random Vibration
Operating ...............................................................................
Nonoperating .........................................................................
5 to 500 Hz, 0.3 g_rms
5 to 500 Hz, 2.4 g_rms (tested in accordance with IEC-60068-2-64; nonoperating test
profile exceeds the requirements of MIL-PRF-28800F, Class 3)
Note: For full EMC compliance, operate this device with shielded cabling. In addition, all covers and filler panels must be installed. Refer to the
Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit
ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column.
Safety and Compliance
Safety
This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CAN/CSA-C22.2 No. 61010-1
Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to product documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows:
• 73/23/EEC; Low-Voltage Directive (safety)
• 89/336/EEC; Electromagnetic Compatibility Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this
product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling
centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm.
BUY ONLINE at ni.com or CALL [phone] (U.S.)
4