PXI-8101 Datasheet, PDF (4/6 Pages) National Instruments Corporation – High-Value Embedded Controllers for PXI

High-Value Embedded Controllers for PXI
Specifications
Specifications subject to change without notice.
Features
Processor
PXI-8101............................................
PXI-8102............................................
Chipset...................................................
Front-side bus
PXI-8101............................................
PXI-8102............................................
System memory (RAM)
Standard............................................
Maximum..........................................
Ethernet.................................................
Hard drive..............................................

Video......................................................

Serial......................................................
Parallel...................................................

Hi-Speed USB........................................
Intel Celeron 575 2.0 GHz
Intel Celeron T3100 Dual Core 1.9 GHz
Mobile Intel GM45 Express Chipset
667 MHz
800 MHz
1 GB 800 MHz DDR2 RAM PC2 6400
4 GB 800 MHz DDR2 RAM PC2 6400
10/100/1000BASE-TX, RJ45 connector
80 GB minimum, 5400 rpm, internal
2.5 in., 9.5 mm Serial ATA 1.0 interface
Integrated Graphics (Mobile Intel
GM45 Express Chipset)
1 (RS232)
IEEE 1284 Type C miniature connector
(adapter cable not included)
2
Power Requirements
Voltage
(V)
+3.3
+5
+12
-12
Current (A)
Typical
Maximum
PXI-8101
PXI-8102
PXI-8101
PXI-8102
2.25
2.50
3.6
4.80
3.50
4.00
6.6
7.80
0.001
0.001
0.075
0.075
0.0
0 .0
0.0
0.0
Physical
Board dimensions..................................


Slot requirements..................................

Compatibility..........................................
Weight...................................................
2-slot 3U PXI module,
4.0 by 13 by 21.6 cm
(1.59 by 5.1 by 8.5 in.)
One system slot plus one controller
expansion slot
Fully compatible with PXI Specification
0.645 kg (1.42 lb) typical
Environment
Maximum altitude.................................

Pollution degree.....................................
Indoor use only.
2,000 m (800 mbar)
(at 25 °C ambient temperature)
2
Operating Environment
Ambient temperature range¹................. 5 to 50 °C^{2, 3}

(tested in accordance with

IEC-60068-2-1 and IEC-60068-2-2)
Relative humidity range......................... 10 to 90% noncondensing

(tested in accordance with

IEC-60068-2-56)
1_F _{or chassis that are not available in the online catalog at ni.com, contact}
National Instruments for supported operating temperatures.
2_{5 to 40 °C for the NI PXI-1000B DC.}
3_{Processor should not throttle CPU frequency under reasonable, worst case}
processor workloads in high operating temperature.
Storage Environment
Ambient temperature range..................


Relative humidity range.........................


-40 to 65 °C
(tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2)
5 to 95% noncondensing
(tested in accordance
with IEC-60068-2-56)
Shock and Vibration
Operating shock.....................................



Random vibration
Operating...........................................

Nonoperating....................................




30 g peak, half-sine, 11 ms pulse
(tested in accordance with
IEC-60068-2-27; test profile developed
in accordance with MIL-PRF-28800F)
5 to 500 Hz, 0.3 g_rms
(with solid-state hard drive)
5 to 500 Hz, 2.4 g_rms
(tested in accordance with
IEC-60068-2-64; nonoperating test
profile exceeds the requirements of
MIL-PRF-28800F, Class 3)
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4