PXI-5670 Datasheet, PDF (4/5 Pages) National Instruments Corporation – 250 kHz to 2.7 GHz/8, 32 or 256 MB memory

2.7 GHz RF Vector Signal Generator
Specifications
Typical Noise Floor at 2 GHz
Output Power Level (dBm)
-57
-50
-40
-30
-20
-10
0
10
Typical Noise Floor (dBm/Hz)
-158
-157
-154
-147
-140
-130
-120
-110
Vector modulation bandwidth flatness............ ±0.5 dB typical
Group delay variation (within the vector
modulation bandwidth) ............................. ±20 ns typical
Group delay
PXI-5421..................................................... 750 ns typical
PXI-5610..................................................... 1200 ns typical
Overload protection on RF output
Maximum reverse RF power ..................... 4 W maximum
Maximum DC input.................................... ±50 VDC
Local Oscillator Output
Frequency range ............................................... 3.2 to 5.9 GHz
Output power ................................................... -22 dBm (typical)
VSWR ............................................................... 1.5:1 maximum
Phase noise – Local Oscillator
Offset Frequency (kHz)
1
10
100
3.2 GHz
-89 dBc/Hz
-98 dBc/Hz
-120 dBc/Hz
Carrier Frequency
4.2 GHz
-88 dBc/Hz
-98 dBc/Hz
-120 dBc/Hz
Modulation
Frequency Modulation (modulation
frequency 1 kHz, carrier frequency
1 GHz, FM deviation 100 kHz,
filter bandwidth 2 MHz ............................. <1%
Digital Modulation
QPSK, 16-QAM, 64-QAM (root raised cosine Filter, alpha = 0.25,
carrier frequency = 1 GHz, 2,000 symbol PRBS, equalization: ON)
Symbol Rate
EVM (%)
200 kS/s
0.7
1 MS/s
0.8
2.56 MS/s
1.0
5.12 MS/s
1.8
10 MS/s
2.5
5.2 GHz
-85 dBc/Hz
-95 dBc/Hz
-120 dBc/Hz
MER (dB)
39
38
36
35
32
Power Requirements
Typical
PXI-5610
PXI-5421
+3.3 VDC
150 mA
1.9 A
+5 VDC
2.6 A
2.0 A
+12 VDC
900 mA
460 mA
-12 VDC
60 mA
10 mA
Total Power
25.0 W
21.9 W
Calibration
Self-calibration
PXI-5610..................................................... Correction for YIG offset and gain
PXI-5421..................................................... Correction for DC gain offset and timing errors
External calibration interval
PXI-5610..................................................... 1 year
PXI-5421..................................................... 2 years
Physical
PXI-5610 (2 slots) ............................................. 10 by 16 cm (3.9 by 6.3 in.)
PXI-5421 (1 slot) ............................................... 10 by 16 cm (3.9 by 6.3 in.)
Environmental
Operating Environment
Operating temperature .............................. 0 to +55 °C (Meets IEC-60068-2-1 and IEC-60068-2-2)¹
Relative humidity....................................... 10 to 90%, noncondensing (Meets IEC 60068-2-56)
Altitude (indoor use only) ......................... 0 to 2,000 m (at 25 °C ambient temperature)
Storage Environment
Ambient temperature ................................ -20 to 70 °C (Meets IEC-60068-2-1 and IEC-60068-2-2.)
Relative humidity....................................... 5 to 95%, noncondensing (Meets IEC-60068-2-56.)
Shock and Vibration
Nonoperational shock ............................... 30 g peak, half-sine, 11 ms pulse (Meets
IEC-60068-2-27. Test profile developed in accordance
with MIL-PRF-28800F.)
Random vibration Non-operating.............. 5 to 500 Hz, 2.4 g_rms (Meets IEC-60068-2-64.
Non-operating test profile exceeds the requirements
of MIL-PRF-2880F, Class B)
1_{When installed in the NI PXI-101x or PXI-1000B chassis, the PXI-5421 operating temperature is 0 to +45 °C}
Certifications and Compliances
CE Mark Compliance
Safety
This product is designed to meet the requirements of the following standards of safety for electrical
equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1
Electromagnetic Compatibility
Emissions................................................... EN 55011 Class A at 10 m FCC Part 15A above 1 GHz
Immunity .................................................... EN 61326:1997 + A2:2001, Table 1
EMC/EMI ................................................... CE, C-Tick and FCC Part 15 (Class A) Compliant
Ordering Information
NI PXI-5670
8 MB memory ..........................................................778768-01
32 MB memory ........................................................778768-02
256 MB memory ......................................................778768-03
Includes PXI-5610, PXI-5421, NI-RFSG, Modulation Toolkit
for LabVIEW, cables, and calibration certificates.
BUY ONLINE!
Visit ni.com/info and enter pxi5670.
4 National Instruments • Tel: [phone] • Fax: [phone] • [e-mail] • ni.com