CFP-DI-300 Datasheet, PDF (4/5 Pages) National Instruments Corporation – Digital Input Modules for Compact FieldPoint

Digital Input Modules for Compact FieldPoint
Power Requirements (from Network Module)
cFP-DI-300.............................................................................. 185 mW
cFP-DI-301.............................................................................. 325 mW
cFP-DI-304.............................................................................. 1 W
cFP-DI-330.............................................................................. 200 mW
Environment
Operating temperature .......................................................... -40 to 70 °C
Storage temperature.............................................................. -55 to 85 °C
Relative humidity ................................................................... 10 to 90%, noncondensing
Shock and Vibration
Operating vibration, random (IEC 60068-2-64)......................
Operating vibration, sinusoidal (IEC 60068-2-6)....................
Operating shock (IEC 60068-2-27) .........................................
10 to 500 Hz, 5 g_rms
10 to 500 Hz, 5 g
50 g, 3 ms half sine, 18 shocks at 6 orientations;
30 g, 11 ms half sine, 18 shocks at 6 orientations
Safety and Compliance
Safety
This product is designed to meet the requirements of the following standards
of safety for electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification,
search by model number or product line, and click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards
of EMC for electrical equipment for measurement, control, and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to
product documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives,
as amended for CE marking, as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for any
additional regulatory compliance information. To obtain the DoC for this product,
visit ni.com/certification, search by model number or product line, and click
the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4