PXI-8183RT Datasheet, PDF (3/4 Pages) National Instruments Corporation – 850 MHz Intel Celeron Real-Time Embedded Controllers for PXI

850 MHz Intel Celeron Real-Time Embedded Controllers for PXI
Specifications subject to change without notice.
Features
Processor.............................................
System memory (RAM) .......................
Ethernet...............................................
Hard drive............................................
Serial ...................................................
Parallel ................................................
USB ....................................................
850 MHz Intel Celeron
256 MB, 7.5 ns SDRAM (standard)
512 MB, 7.5 ns SDRAM (maximum)
10/100BASE-TX, RJ45 connector
40 GB minimum, internal 2.5 in.,
9.5 mm Fast Ultra
ATA100 Interface
1 (RS232)
IEEE 1284, Type C Connector
2 x USB 1.1
Power Requirements
Voltage (V)
+3.3
+5
+12
-12
Ty p i c a l
3.0
4.5
0.01
0.0
C u rre n t
Maximum
4.0
6.0
0.04
0.0
Random vibration
Operating ........................................
Nonoperating ..................................
5 to 500 Hz, 0.3 g_rms
(with solid-state hard drive)
5 to 500 Hz, 2.4 g_rms
(tested in accordance with
IEC-60068-2-64; nonoperating
test profile exceeds the
requirements of MIL-PRF-28800F,
Class 3)
Safety and Compliance
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note: For UL and other safety certifications, refer to the product label or
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Physical
Board dimensions ...............................
Slot requirements ...............................
Compatibility .......................................
Weight.................................................
2-slot 3U PXI Express module
1 system slot plus 1 controller
expansion slot (to the left of the
system slot)
Fully compatible with
PXI specification
0.82 kg (1.8 lb) typical
Operating Environment
Ambient temperature range¹ .............. 5 to 50 °C^{2, 3} (tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2)
Relative humidity range...................... 10 to 90%, noncondensing
(tested in accordance with
IEC-60068-2-56)
1 _{For chassis not available in the online catalog at ni.com, please contact National}
Instruments for supported operating temperatures.
2 _{5 to 50 °C for NI PXI-1036 Revision D and later, and NI PXI-1036DC Revision C and later.}
3 _{5 to 40 °C for NI PXI-1036 revisions B and C and NI PXI-1036DC Revision B.}
Storage Environment
Ambient temperature range ...............
Relative humidity range......................
-40 to 65 °C (tested in
accordance with IEC-60068-2-1
and IEC-60068-2-2)
5 to 95% noncondensing
(tested in accordance with
IEC-60068-2-56)
Shock and Vibration
Operating shock ..................................
30 g peak, half-sine, 11 ms pulse
(tested in accordance with
IEC-60068-2-27; test profile
developed in accordance
with MIL-PRF-28800F)
Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to
product documentation.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for
any additional regulatory compliance information. To obtain the DoC for
this product, visit ni.com/certification, search by model number or
product line, and click the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3