PXI-2530 Datasheet, PDF (3/4 Pages) National Instruments Corporation – High-Density Multiconfiguration Multiplexer/Matrix

High-Density Multiconfiguration Multiplexer/Matrix
Specifications
PXI-2530
Multiplexer sizes ....................................... 128x1 (1-wire)
64x1 (2-wire)
32x1 (4-wire)
16x1 (1-wire) (8)
Matrix sizes ............................................... 4x32 (1-wire)
8x16 (1-wire)
4x16 (2-wire)
SCXI-1130
Multiplexer sizes ....................................... 256x1 (1-wire)
128x1 (2-wire)
64x1 (4-wire)
16x1 (1-wire) (16)
Matrix sizes ............................................... 4x64 (1-wire)
8x32 (1-wire)
4x32 (2-wire)
Input Characteristics
Maximum switching voltage............................ 60 VDC, 30 V_rms, CAT I (channel-to-channel
and channel-to-ground)
Maximum current ............................................. 0.4 A (per terminal or internal path)
Maximum switching power ............................. 10 W (per channel, resistive)
Typical DC path resistance
(channel-to-common)
Initial ................................................... <2 Ω
End of life............................................ ≥3 Ω
Dynamic Characteristics
Maximum scan rate ......................................... 900 channels/s
Expected relay life
Mechanical ................................................ 10⁹ operations
Electrical .................................................... 10⁸ operations (10 V, 100 mA, resistive)
Physical
Relay types ....................................................... reed
Contact material............................................... rhodium
I/O connectors .................................................. 176-pin docking station plug
Dimensions
PXI-2530..................................................... 2 x 10 x 16 cm (.8 x 3.9 x 6.4 in.)
SCXI-1130 .................................................. 3.0 x 17.2 x 20.3 cm (1.2 x 6.9 x 8.0 in.)
Environment
Operating temperature..................................... 0 to 55 ˚C
Storage temperature ........................................ -40 to 70 ˚C
Relative humidity ............................................. 5 to 85% noncondensing
Pollution degree ............................................... 2
Indoor use only
Safety
This product is designed to meet the requirements of the following standards of safety for electrical
equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 3111-1, UL 61010B-1
• CAN/CSA C22.2 No. 1010.1
CE Compliance
This product meets the essential requirements of applicable European Directives,
as amended for CE marking, as follows:
Low-Voltage Directive (safety) .................. 73/23/EEC
Electromagnetic Compatibility
Directive (EMC) ................................... 89/336/EEC
National Instruments • Tel: [phone] • Fax: [phone] • [e-mail] • ni.com 3