SBRIO-9601 Datasheet, PDF (2/3 Pages) National Instruments Corporation – NI Single-Board RIO Embedded Control and Acquisition Devices

NI Single-Board RIO Embedded Control and Acquisition Devices
Specifications
Network
Network Interface...............................
Compatibility .......................................
Communication rates..........................
Maximum cabling distance.................
10BASE-T and
100BASE-TX Ethernet
IEEE 802.3
10 Mb/s, 100 Mb/s autonegotiated
100 m/segment
Power Requirements
Power supply voltage range ............... 19 to 30 V
Power consumption (internal, driving no loads)
sbRIO-960x...................................... 6.00 W
sbRIO-961x...................................... 7.50 W
sbRIO-963x...................................... 7.75 W
sbRIO-964x...................................... 8.00 W
Xilinx Spartan-3 Reconfigurable FPGA
Number of logic cells
sbRIO-9611/9631/9641 ..................
sbRIO-9612/9632/9642 ..................
Available embedded RAM
sbRIO-9611/9631/9641 ..................
sbRIO-9612/9632/9642 ..................
17,280
46,080
432 kb
720 kb
3.3 V Digital I/O
Number of channels............................
Max current per channel ....................
Output characteristics
Output high voltage....................
Output low voltage.....................
110
3mA
2.7 V min; 3.3 V max
0.07 V min; 0.54 V max
Input characteristics
Input high voltage ...................... 2.0 V min; 5.25 V max
Input low voltage ....................... 0 V min; 0.8 V max
Analog Input (sbRIO-961x/963x/964x only)
Number of channels............................
ADC resolution....................................
Conversion time ..................................
Nominal input ranges .........................
32 single-ended or 16 differential
16 bits
4 µs (250 kS/s aggregate)
±10, ±5, ±1, and ±0.2 V
Analog Output (sbRIO-963x/964x only)
Number of channels............................
DAC resolution....................................
Update time (one channel) .................
Output range .......................................
4
16 bits
3 µs
±10 V
24 V Digital Input (sbRIO-964x only)
Number of channels............................
Input type ............................................
Digital logic levels
OFF state
Input voltage ..............................
Input current ...............................
ON state
Input voltage ..............................
Input current ...............................
32
Sinking
≤5 V
≤150 µA
≥10 V
≥330 µA
24 V Digital Output (sbRIO-964x only)
Number of channels............................ 32
Output type ......................................... Sourcing
External supply voltage....................... 6 to 35 VDC
Continuous output current on each channel
No heat sinks.................................. 250 mA max
External heat sink added................ 1.5 A max (20 A max aggregate)
Physical Characteristics
If you need to clean the device, wipe it with a dry towel.
Torque for screw terminals (J3).......... 0.5 to 0.6 N·m (4.4 to 5.3 lb·in.)
Weight
sbRIO-960x...................................... 198.4 g (7.0 oz)
sbRIO-961x...................................... 266.5 g (9.4 oz)
sbRIO-963x...................................... 269.3 g (9.5 oz)
sbRIO-964x...................................... 292.0 g (10.3 oz)
Safety Voltages
Connect only to voltages that are within these limits.
V-to-C .................................................. 35 V max, Measurement Category I
Caution: Do not connect to signal or use for measurements within
Measurement Category II, III, or IV.
Compliance
National Instruments makes no product safety, electromagnetic
compatibility (EMC), or CE marking compliance claims for the sbRIO-
961x/963x/964x. The end-product supplier is responsible for conformity
to any and all compliance requirements.
Note: For UL and other safety certifications, refer to the product label or
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
Environmental
The sbRIO-96xx devices are intended for indoor use only. The sbRIO-96xx
devices are intended to be built into a suitable enclosure
Ambient temperature in enclosure
(IEC 60068-2-1, IEC 60068-2-2).................-20 to 55 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2)...........
Operating humidity (IEC 60068-2-56) .
Maximum altitude...............................
Pollution degree (IEC 60664) ..............
-40 to 85 °C
10 to 90% RH,
noncondensingStorage
humidity (IEC 60068-2-56)5 to
95% RH, noncondensing
2,000 m
2
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
2