PXIE-EXPRESSCARD8360 Datasheet, PDF (2/3 Pages) National Instruments Corporation – Laptop Control of PXI (ExpressCard MXI for PXI Express)

Laptop Control of PXI (ExpressCard MXI for PXI Express)
Specifications
Specifications are subject to change without notice.
Power Requirements
NI PXIe-8360
Power Rail
+3.3 V
+5 V
+12 V
+5 VAUX
Typical Current
2.5 A
0A
0A
0.3 A
Maximum Current
3A
0A
0A
0.4 A
ExpressCard-8360
Power Rail
+3.3 V
+3.3 VAUX
+1.5 V
Typical Current
220 mA
20 mA
0 mA
Maximum Current
280 mA
30 mA
0 mA
Physical
Dimensions
NI PXIe-8360...................................
NI ExpressCard-8360 ......................
Slot requirements
NI PXIe-8360...................................
NI ExpressCard-8360 ......................
Maximum cable length...................
Compatibility...................................
10.0 by 16.0 cm (3.9 by 6.3 in.)
10.2 by 3.4 cm (4.0 by 1.3 in.)
One 3U PXI Express system
controller slot
One ExpressCard/34 or
ExpressCard/54 slot
7m
Fully compatible with the
PXI Express Hardware
Specification, Revision 1.0,
and the PCMCIA ExpressCard
Standard, Revision 1.0 or later
Operating Environment
NI PXIe-8360
Ambient temperature range ...........
Relative humidity range .................
NI ExpressCard-8360
Ambient temperature range ...........
Relative humidity range .................
0 to 55 °C
(Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2.
Meets MIL-PRF-28800F Class 3
low temperature limit and
MIL-PRF-28800F Class 2 high
temperature limit.)
10 to 90%, noncondensing
(Tested in accordance with
IEC-60068-2-56.)
0 to 65 °C
(Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2.)
5 to 95%, noncondensing
(Tested in accordance with
IEC-60068-2-56.)
Storage Environment
NI PXIe-8360
Ambient temperature range ...........
Relative humidity range .................
NI ExpressCard-8360
Ambient temperature range ...........
Nonoperating thermal shock ..........
-40 to 71 °C
(Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2.
Meets MIL-PRF-28800F
Class 3 limits.)
5 to 95%, noncondensing
(Tested in accordance with
IEC-60068-2-56.)
-20 to 65 °C
(Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2.)
-20 to 65 °C, 5 shocks
Shock
NI PXIe-8360
Operating shock..............................
NI ExpressCard-8360
Nonoperating shock........................
30 g peak, half-sine, 11 ms pulse
(Tested in accordance with
IEC-60068-2-27. Meets
MIL-PRF-28800F Class 2 limits.)
50 g, 11 ms
(Tested in accordance with
IEC 60068-2-27.)
Vibration
NI PXIe-8360
Random Vibration
Operating ....................................
Nonoperating..............................
NI ExpressCard-8360
Nonoperating vibration,
sinusoidal........................................
5 to 500 Hz, 0.3 g_rms
5 to 500 Hz, 2.4 g_rms
(Tested in accordance with
IEC-60068-2-64. Nonoperating
test profile exceeds the
requirements of
MIL-PRF-28800F, Class 3.)
15 g, 100 to 2000 Hz (Tested in
accordance with IEC 60068-2-6.)
Note: For full EMC compliance, operate this device with shielded
cabling. In addition, all covers and filler panels must be installed. Refer
to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product,
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the certification column.
BUY ONLINE at ni.com or CALL [phone] (U.S.)
2